topic cant see but one lun with default lpfc driver in rhel 3.0 in Operating System - Linux

cant see but one lun with default lpfc driver in rhel 3.0

Unix Administrator_5 — Tue, 20 Jun 2006 10:43:19 GMT

I am trying to connect a proliant DL380 with an emulex LP8000 FC card to an MTI S200 disk array. I am using the deafult 7.1.14 driver that comes with RHEL 3.0 update 5.

I can see one of 5 configured luns, but not the others.

Anyone have any suggestions.

Re: cant see but one lun with default lpfc driver in rhel 3.0

Steven E. Protter — Tue, 20 Jun 2006 13:45:22 GMT

Shalom,

Two things come to mind.

1) The other LUNS are not assigned by WWN to this card.

2) You need an enhanced driver compiled into your kernel. You'll probably want the driver from HP, not your vendor. The driver much match your OS and update.

SEP

Re: cant see but one lun with default lpfc driver in rhel 3.0

Alan_152 — Wed, 21 Jun 2006 09:46:22 GMT

The native rhel3 driver isn't good enough (rhel3u5 was a bit buggy still). You'll want to update...