https://community.hpe.com/t5/operating-system-linux/msl-6000-issue/m-p/3859766#M25134 I have connected My Linux box and MSL 6000 series library using san switches. How can i verify from linux whether the drives are getting detected like in HP UX we can use ioscan -fnC tape. any help will be appreciated Sat, 09 Sep 2006 03:27:38 GMT suresh_k 2006-09-09T03:27:38Z https://community.hpe.com/t5/operating-system-linux/msl-6000-issue/m-p/3859766#M25134 I have connected My Linux box and MSL 6000 series library using san switches. How can i verify from linux whether the drives are getting detected like in HP UX we can use ioscan -fnC tape. any help will be appreciated Sat, 09 Sep 2006 03:27:38 GMT https://community.hpe.com/t5/operating-system-linux/msl-6000-issue/m-p/3859766#M25134 suresh_k 2006-09-09T03:27:38Z https://community.hpe.com/t5/operating-system-linux/msl-6000-issue/m-p/3859767#M25135 There isn't any command like ioscan in the linux.<BR />You manybe look at /proc/scsi/....<BR />In the HBA driver, The connected HW may be showed in the relational files. Tue, 26 Sep 2006 22:29:14 GMT https://community.hpe.com/t5/operating-system-linux/msl-6000-issue/m-p/3859767#M25135 Taohung 2006-09-26T22:29:14Z