topic Re: Debian2.6 - DD Sata non reconnaissance in Operating System - Linux

Debian2.6 - DD Sata non reconnaissance

Ghibaudo — Sat, 06 Jan 2007 08:57:20 GMT

Proliant ML 150 G3 installation de debian sarge 2.6, au moment de la détection des disques en SATA il ne les trouvent pas.

Don't find hard disk SATA when I install Debian 2.6 on server HP Proliant ML 150 G3.

Thank's

Re: Debian2.6 - DD Sata non reconnaissance

jordi bardaji — Sun, 07 Jan 2007 08:33:16 GMT

Salut!

J'ai le mÃªme problem. Quel est le version debian tu est en train d'installer?

As tu essayÃ© de fer la installation avec sarge 3.1 r4?

Jordi

Re: Debian2.6 - DD Sata non reconnaissance

Jonathan E. Deady — Mon, 08 Jan 2007 09:18:15 GMT

I never was able to pickup French. However based on what you posted in english I think you want to say that while attempting the install the disks aren't recognized. My experience with Proliant installs of all types is that you may need a boot disk. Unfortunately I don't believe HP supports any versions of Debian. Try Fedora or CentOS. If you have the $$$ get a copy of RedHat linux enterprise.

-Jonathan

Re: Debian2.6 - DD Sata non reconnaissance

jordi bardaji — Mon, 08 Jan 2007 11:04:14 GMT

Excuse me!

I have forgotten there was another people listening.

I have PROLIANT ML 150 G3 with SATA in motheboard and SAS card with scsi disks. I need to install Debian. HP support very recently Debian in several PROLIANT servers but not ML 150 G3. This is my problem and also Ghibaudo.
The controler SAS is reported with the diagnostics CD by HP8 Inernal Port SAS HBA with RAID.

You say that is necessary a boot disk. What this means in this context?

thanks in advanced,

Jordi

Re: Debian2.6 - DD Sata non reconnaissance

Ghibaudo — Mon, 08 Jan 2007 16:49:43 GMT

Thank's for all you comments..
In fact, now it's ok for the setup of Debian version Etch, on it solves the problem;
This version recognize the hard disk SATA
This we have been able to finish the setup.

Eric

Re: Debian2.6 - DD Sata non reconnaissance

jordi bardaji — Tue, 09 Jan 2007 05:26:19 GMT

Ghibaudo:

Tu peut me respondre en franÃ§ais et Ã mon email au fin du post, si tu prÃ©fÃ¨re.

Four questions:

Have you SAS (SCSI)or only SATA controler?

Do you know if SAS is suported by etch?

SATA recognized is RAID?

Is your computer a server?

Thanks in advanced.

Jordi Bardaji
jordibardaji@gmail.com

Re: Debian2.6 - DD Sata non reconnaissance

Maarten Verwijs — Tue, 09 Jan 2007 08:04:45 GMT

Also, Debian is very supported by HP. Only not always officially. Check this:

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T2811AA