https://community.hpe.com/t5/operating-system-linux/red-hat-el-4-can-not-detect-disk-array-on-ml110-g3/m-p/3974866#M27670 download rhel ES/AS 4, update 4. then try it. Wed, 04 Apr 2007 12:10:22 GMT Court Campbell 2007-04-04T12:10:22Z https://community.hpe.com/t5/operating-system-linux/red-hat-el-4-can-not-detect-disk-array-on-ml110-g3/m-p/3974865#M27669 Hello everyone,<BR />Please help me, here is my problem:<BR /><BR />I have a ML110 g3 Server with 2 80 Gb SATA disks, I created a RAID 0 Array the array is visible by BIOS and when the system is comming up, it shows 1 logical unit found, when I try to install Red Hat Enterprise Linux 4, I get the message "An error has ocurred - no valid devices were found on wich to create a new file system. Please check your hardware for the cause of this problem.<BR />I downloaded the HP Embedded SATA RAID Controller Driver Diskette for Red Hat Enterprise Linux 4 (x86) and installed with #linux update dd, I get the same message.<BR />Does anyone know How can I solve it?<BR />Thanks in Advance<BR />Francisco Flores Tue, 03 Apr 2007 22:33:29 GMT https://community.hpe.com/t5/operating-system-linux/red-hat-el-4-can-not-detect-disk-array-on-ml110-g3/m-p/3974865#M27669 Francisco Flores 2007-04-03T22:33:29Z https://community.hpe.com/t5/operating-system-linux/red-hat-el-4-can-not-detect-disk-array-on-ml110-g3/m-p/3974866#M27670 download rhel ES/AS 4, update 4. then try it. Wed, 04 Apr 2007 12:10:22 GMT https://community.hpe.com/t5/operating-system-linux/red-hat-el-4-can-not-detect-disk-array-on-ml110-g3/m-p/3974866#M27670 Court Campbell 2007-04-04T12:10:22Z