https://community.hpe.com/t5/operating-system-linux/insmod/m-p/2847622#M2907 insmod doesn't load required prerequisite modules.<BR /><BR />Try loading the module using modprobe. <BR /><BR />lsmod will show dependencies. Tue, 19 Nov 2002 14:19:46 GMT Bill Thorsteinson 2002-11-19T14:19:46Z https://community.hpe.com/t5/operating-system-linux/insmod/m-p/2847621#M2906 Hi all,<BR /><BR />I'm not able to load a module using insmod<BR />it gives the following error<BR />init_sctp: register_chrdev failed, error=-16!<BR />init_sctp: module installed.<BR />this is the output of dmesg.<BR /><BR />the same modules i was able to load, i just did a rmmod and now i'm not able to load it,<BR />what could be the reason<BR /><BR />regards<BR />chakri Tue, 19 Nov 2002 09:37:18 GMT https://community.hpe.com/t5/operating-system-linux/insmod/m-p/2847621#M2906 Chakravarthi 2002-11-19T09:37:18Z https://community.hpe.com/t5/operating-system-linux/insmod/m-p/2847622#M2907 insmod doesn't load required prerequisite modules.<BR /><BR />Try loading the module using modprobe. <BR /><BR />lsmod will show dependencies. Tue, 19 Nov 2002 14:19:46 GMT https://community.hpe.com/t5/operating-system-linux/insmod/m-p/2847622#M2907 Bill Thorsteinson 2002-11-19T14:19:46Z