https://community.hpe.com/t5/operating-system-linux/ilo2-snmpwalk/m-p/4041359#M29404 I would like to snmp query ilo2 network<BR />interface, this is the setup:<BR />host: DL360g5<BR />OS: Linux 2.6.19.7<BR />ACPI enabled<BR />IPMI enabled<BR />ilo2 ip: obtained by dhcp<BR />ilo2 snmp pass-through: enabled<BR />hpasm, hpasr installed.<BR />snmpd.conf dlmod cmaX loaded correctly<BR />also comunity and access permission set<BR /><BR />this query works well:<BR />snmpwalk -v 2c -c private localhost 1.3.6.1.4.1.232<BR /><BR />also a query done over nic1 ip address works well<BR /><BR />but if the same query is done over ilo2 ip address (obtained by dhcp) I receive a<BR />Timeout: No Response from ...<BR /><BR />thanks in advance Sat, 21 Jul 2007 06:24:11 GMT Maurizio Boriani 2007-07-21T06:24:11Z https://community.hpe.com/t5/operating-system-linux/ilo2-snmpwalk/m-p/4041359#M29404 I would like to snmp query ilo2 network<BR />interface, this is the setup:<BR />host: DL360g5<BR />OS: Linux 2.6.19.7<BR />ACPI enabled<BR />IPMI enabled<BR />ilo2 ip: obtained by dhcp<BR />ilo2 snmp pass-through: enabled<BR />hpasm, hpasr installed.<BR />snmpd.conf dlmod cmaX loaded correctly<BR />also comunity and access permission set<BR /><BR />this query works well:<BR />snmpwalk -v 2c -c private localhost 1.3.6.1.4.1.232<BR /><BR />also a query done over nic1 ip address works well<BR /><BR />but if the same query is done over ilo2 ip address (obtained by dhcp) I receive a<BR />Timeout: No Response from ...<BR /><BR />thanks in advance Sat, 21 Jul 2007 06:24:11 GMT https://community.hpe.com/t5/operating-system-linux/ilo2-snmpwalk/m-p/4041359#M29404 Maurizio Boriani 2007-07-21T06:24:11Z https://community.hpe.com/t5/operating-system-linux/ilo2-snmpwalk/m-p/4041360#M29405 why you want to query throgh ilo?Purpose of ILO is some thing different. Sat, 21 Jul 2007 17:03:18 GMT https://community.hpe.com/t5/operating-system-linux/ilo2-snmpwalk/m-p/4041360#M29405 skt_skt 2007-07-21T17:03:18Z