https://community.hpe.com/t5/operating-system-linux/boot-error-xw6200/m-p/4095403#M30565 hello wayne, i've got the same problem with my xw6200. do you've already solved ? <BR />thanks for reply.<BR />best regards,<BR /><BR />tommy Wed, 21 Nov 2007 10:03:30 GMT heimatfilmer 2007-11-21T10:03:30Z https://community.hpe.com/t5/operating-system-linux/boot-error-xw6200/m-p/4095402#M30564 Hello,<BR /><BR /><BR />I have an HP xw6200 with dual 3.2Ghz (Irwindale) processors. The issue I am having is that if i detach the internal connector to the front panel USB ports, I get an error message during boot which forces me to press F1 in order to continue. I have installed an internal multi-card reader into the internal 3.5" bay. I wasn't too concerned with having both of the front USB ports functioning, so I removed the pins from the plastic pin connector to install directly to the motherboard. Everything works fine ( both the card reader as well as the top usb port ) with the exception of the F1 boot error. If i press F1 , the system boots as expected and everything works perfectly. Is there a way to disable this in the post-boot config somehow? There are NO visable options within the bios itself to disable the F1 boot prompts. Any help in this matter would be greatly appreciated. Wed, 31 Oct 2007 16:02:16 GMT https://community.hpe.com/t5/operating-system-linux/boot-error-xw6200/m-p/4095402#M30564 wayne21061 2007-10-31T16:02:16Z https://community.hpe.com/t5/operating-system-linux/boot-error-xw6200/m-p/4095403#M30565 hello wayne, i've got the same problem with my xw6200. do you've already solved ? <BR />thanks for reply.<BR />best regards,<BR /><BR />tommy Wed, 21 Nov 2007 10:03:30 GMT https://community.hpe.com/t5/operating-system-linux/boot-error-xw6200/m-p/4095403#M30565 heimatfilmer 2007-11-21T10:03:30Z