topic Re: kernel parameters in linux in Operating System - Linux

kernel parameters in linux

Nagashayana S.H. — Mon, 10 Dec 2007 10:09:08 GMT

1)How can we configure kernel parameters in linux os?
2)how can we know how much memory space is required by each individual part in linux os?

Re: kernel parameters in linux

Stuart Browne — Mon, 10 Dec 2007 11:14:13 GMT

1) Kernel parameters are generally configured using the '/proc/sys/' structure, and 'sysctl' (see the man page and '/etc/sysctl.conf').

Some parameters can't be done this way, and need to be overridden using the boot loader (usually grub), using the 'append' lines in '/boot/grub/grub.conf'.

What settings are you wanting to tweak?

2) You're wondering how much memory individual componants of the kernel are taking up, as against how much a process is?

Using 'ps' is good for most processes. If you're running a modular kernel, 'lsmod' is your friend for finding out how much individual drivers are using.

If you're running a monolithic kernel, err, well.. Not sure.. ;)

Re: kernel parameters in linux

Steven E. Protter — Mon, 10 Dec 2007 14:02:57 GMT

Shalom,

There are some commonalities between distributions.I will speak of what I know which is Red Hat based Linux.

/etc/sysctl.conf contains permanent kernel parameters which you can customize to your hearts content.

Overwriting individual files in
/proc/sys/kernel

Can temporarily change things.

SEP

Re: kernel parameters in linux

Tor-Arne Nostdal — Wed, 12 Dec 2007 18:31:54 GMT

Perhaps you could state which linux os you run...?

The answers you could expect to get without knowing more - is therefore very general answers.

Some os's have system administrator tools which give you a user interface to changing system settings.

You need to specify a bit more to get more specific answers

/Tor-Arne

Re: kernel parameters in linux

Sitarama.H.N — Thu, 13 Dec 2007 04:14:04 GMT

Hi,
Please go through this below link this may help u in configuring the kernel parameters

http://linux.die.net/man/8/sysctl

Re: kernel parameters in linux

Jeeshan — Thu, 13 Dec 2007 04:18:39 GMT

1)to change kernel parameters in linux OS edit file in /etc/sysctl.conf and you can run it online.

2)What is your point? Is it application or any other software?
if It's oracle DB server it will use most of your memory.
Others application use their needed.

But you can minimize your memory consumption by deactivating background services which is not needed. Unnecessary background services will occupied your system resources.