https://community.hpe.com/t5/operating-system-linux/fan-speed-control/m-p/2870592#M3161 How can I control the fan speed of a Proliant ML330 on a 2.4 kernel? I tried with the latest cpqhealth but it didn't work (fan speed is always high). I have another Proliant ML330 with RedHat 7.0 (kernel 2.2), a very old cpqhealth 1.1.1-1 and it works fine (fan speed gets lower when the driver loads).<BR />Is there any way to access those low-level features? Thu, 26 Dec 2002 21:36:10 GMT Cristian Zea 2002-12-26T21:36:10Z https://community.hpe.com/t5/operating-system-linux/fan-speed-control/m-p/2870592#M3161 How can I control the fan speed of a Proliant ML330 on a 2.4 kernel? I tried with the latest cpqhealth but it didn't work (fan speed is always high). I have another Proliant ML330 with RedHat 7.0 (kernel 2.2), a very old cpqhealth 1.1.1-1 and it works fine (fan speed gets lower when the driver loads).<BR />Is there any way to access those low-level features? Thu, 26 Dec 2002 21:36:10 GMT https://community.hpe.com/t5/operating-system-linux/fan-speed-control/m-p/2870592#M3161 Cristian Zea 2002-12-26T21:36:10Z https://community.hpe.com/t5/operating-system-linux/fan-speed-control/m-p/2870593#M3162 Hi<BR /><BR />Are you sure the kernel is supported with the version that you have installed ?<BR /><BR /><A href="http://h18000.www1.hp.com/products/servers/linux/linuxhealth.html#_Toc509387891" target="_blank">http://h18000.www1.hp.com/products/servers/linux/linuxhealth.html#_Toc509387891</A><BR /><BR />HTH<BR /><BR />Steve<BR /><BR /> Fri, 27 Dec 2002 14:39:39 GMT https://community.hpe.com/t5/operating-system-linux/fan-speed-control/m-p/2870593#M3162 steven Burgess_2 2002-12-27T14:39:39Z