https://community.hpe.com/t5/operating-system-linux/tg3-eth0-flow-control-is-off-for-tx-and-off-for-rx/m-p/4155746#M31836 The problem: right after the installation comes - tg3 eth0: Link is up at 100 Mbps, full duplex. <BR />Tg3 eth0: Flow control is off for off for TX and RX. <BR />I am looking for an answer why there is no access to the server. SSH everything ok he not only listens on <A href="http://www.side.com" target="_blank">www.side.com</A> Wed, 05 Mar 2008 12:15:57 GMT Andre Wyss 2008-03-05T12:15:57Z https://community.hpe.com/t5/operating-system-linux/tg3-eth0-flow-control-is-off-for-tx-and-off-for-rx/m-p/4155744#M31834 Hello <BR />I can not link to the router. <BR />I have found that many google the "broadcom ethernet" mentioned. <BR />Is there the possibility that they explain to me how I could solve this problem for a ProLiant ML 110 G4 with a <BR />06:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 21)<BR />tg3: eth0: Link is up at 100 Mbps, full duplex.<BR />tg3: eth0: Flow control is off for TX and off for RX.<BR />System - Debian 4 Wed, 05 Mar 2008 10:37:18 GMT https://community.hpe.com/t5/operating-system-linux/tg3-eth0-flow-control-is-off-for-tx-and-off-for-rx/m-p/4155744#M31834 Andre Wyss 2008-03-05T10:37:18Z https://community.hpe.com/t5/operating-system-linux/tg3-eth0-flow-control-is-off-for-tx-and-off-for-rx/m-p/4155745#M31835 Hi,<BR /><BR />What exactly is your problem ?<BR /><BR />The "Flow control" message looks like an informational message to me. I very much doubt that it is the cause of your problem.<BR /><BR />Cheers,<BR /><BR />Rob Wed, 05 Mar 2008 11:27:45 GMT https://community.hpe.com/t5/operating-system-linux/tg3-eth0-flow-control-is-off-for-tx-and-off-for-rx/m-p/4155745#M31835 Rob Leadbeater 2008-03-05T11:27:45Z https://community.hpe.com/t5/operating-system-linux/tg3-eth0-flow-control-is-off-for-tx-and-off-for-rx/m-p/4155746#M31836 The problem: right after the installation comes - tg3 eth0: Link is up at 100 Mbps, full duplex. <BR />Tg3 eth0: Flow control is off for off for TX and RX. <BR />I am looking for an answer why there is no access to the server. SSH everything ok he not only listens on <A href="http://www.side.com" target="_blank">www.side.com</A> Wed, 05 Mar 2008 12:15:57 GMT https://community.hpe.com/t5/operating-system-linux/tg3-eth0-flow-control-is-off-for-tx-and-off-for-rx/m-p/4155746#M31836 Andre Wyss 2008-03-05T12:15:57Z https://community.hpe.com/t5/operating-system-linux/tg3-eth0-flow-control-is-off-for-tx-and-off-for-rx/m-p/4155747#M31837 That is not a problem. It is an informational message telling you that the network link is up and that flow control is off.<BR /><BR />If you can SSH to the server, then the network is working.<BR /><BR />Please tell us exactly what you are trying to do, and exactly what doesn't work... "no access to the server" could mean anything...<BR /><BR />Cheers,<BR /><BR />Rob Wed, 05 Mar 2008 12:26:51 GMT https://community.hpe.com/t5/operating-system-linux/tg3-eth0-flow-control-is-off-for-tx-and-off-for-rx/m-p/4155747#M31837 Rob Leadbeater 2008-03-05T12:26:51Z https://community.hpe.com/t5/operating-system-linux/tg3-eth0-flow-control-is-off-for-tx-and-off-for-rx/m-p/4155748#M31838 <!--!*#-->Hello,<BR />I am facing same problem in ML 110 G5.<BR />Because of this my nfs server is running slow.<BR />System - OpenSUSE 10.2 64 bit<BR /><BR />Please help Tue, 02 Dec 2008 06:03:02 GMT https://community.hpe.com/t5/operating-system-linux/tg3-eth0-flow-control-is-off-for-tx-and-off-for-rx/m-p/4155748#M31838 AnkitJ 2008-12-02T06:03:02Z https://community.hpe.com/t5/operating-system-linux/tg3-eth0-flow-control-is-off-for-tx-and-off-for-rx/m-p/4155749#M31839 Please start a new thread.<BR /><BR />Cheers,<BR />Rob Tue, 02 Dec 2008 06:29:18 GMT https://community.hpe.com/t5/operating-system-linux/tg3-eth0-flow-control-is-off-for-tx-and-off-for-rx/m-p/4155749#M31839 Rob Leadbeater 2008-12-02T06:29:18Z