https://community.hpe.com/t5/operating-system-linux/qle220-fc-looping-under-debian/m-p/4168317#M32030 Hello!<BR /><BR />i am running a DL380G5 under Debian etch. I do not succeed in connecting to my MSA1000 using the QLE220 FC card. The qla2xxx driver sees the adaptor but starts looping:<BR /><BR />LIP reset occured<BR />LOOP UP detected<BR />qla2xxx_eh_host_reset: reset succeded<BR />qla2xxx 0000:0b:00.0: scsi(0:0:0): Abort command issued -- 0 c 2002.<BR />scsi 0:0:0:0: scsi: Device offlined - not ready after error recovery<BR /><BR />and so on...<BR /><BR />Any ideas?<BR />I checked cables, switch and so on but do not find any solution...<BR /><BR />Best regards, Peter<BR /> Wed, 26 Mar 2008 14:16:07 GMT P. Bauer 2008-03-26T14:16:07Z https://community.hpe.com/t5/operating-system-linux/qle220-fc-looping-under-debian/m-p/4168317#M32030 Hello!<BR /><BR />i am running a DL380G5 under Debian etch. I do not succeed in connecting to my MSA1000 using the QLE220 FC card. The qla2xxx driver sees the adaptor but starts looping:<BR /><BR />LIP reset occured<BR />LOOP UP detected<BR />qla2xxx_eh_host_reset: reset succeded<BR />qla2xxx 0000:0b:00.0: scsi(0:0:0): Abort command issued -- 0 c 2002.<BR />scsi 0:0:0:0: scsi: Device offlined - not ready after error recovery<BR /><BR />and so on...<BR /><BR />Any ideas?<BR />I checked cables, switch and so on but do not find any solution...<BR /><BR />Best regards, Peter<BR /> Wed, 26 Mar 2008 14:16:07 GMT https://community.hpe.com/t5/operating-system-linux/qle220-fc-looping-under-debian/m-p/4168317#M32030 P. Bauer 2008-03-26T14:16:07Z