cfg2html in red hat 5.1

zubi_1 — Mon, 19 May 2008 03:04:59 GMT

Hi,

When I run cfg2html tool in red hat 5.1, I get error seen below :

May 16 15:39:27 sql1 : Start of cfg2html-linux Version 1.25-060706
May 16 15:39:27 sql1 : Start of cfg2html-linux Version 1.25-060706
May 16 15:39:37 sql1 kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
May 16 15:39:37 sql1 kernel: hda: drive_cmd: error=0x04 { AbortedCommand }
May 16 15:39:37 sql1 kernel: ide: failed opcode was: 0xec
May 16 15:39:38 sql1 : End of cfg2html-linux Version 1.25-060706
May 16 15:39:38 sql1 : End of cfg2html-linux Version 1.25-060706

I tried using latest cfg2html version which is 1.40 and Beta version and still the error appears.
Can anyone please help ? The message appears only when i run cfg2html tool.

Re: cfg2html in red hat 5.1

Colin Topliss — Sun, 25 May 2008 14:22:45 GMT

What type of server are you running it on?

If you look at a DL380 for example, /dev/hda is the cdrom drive (assuming you have one fitted of course). You need to work that all out before getting too concerned with this message.

All this is saying (I think) is that cfg2html has tried to access the cdrom drive and found that it was empty.

However, IF you are running this on a PC, and hda is your hard-drive, then I'd be a bit concerned. It could point to a failing hard-drive.

topic cfg2html in red hat 5.1 in Operating System - Linux

cfg2html in red hat 5.1

Re: cfg2html in red hat 5.1