topic error: %post(hp_qla2x00src-8.01.06.01-12.noarch) scriptlet failed, signal 2 in Operating System - Linux

error: %post(hp_qla2x00src-8.01.06.01-12.noarch) scriptlet failed, signal 2

Costantina Caruso — Wed, 09 Jul 2008 15:20:28 GMT

good morning

I have an msa1000 san g2 kit + upgrade g2
with 4 HP qle220 fc hba

my server is a rhel 5

I use the installation script in hp cd driver
but I obtain this error

error: %post(hp_qla2x00src-8.01.06.01-12.noarch) scriptlet failed, signal 2

the entire log is

Preparing... ########################################### [100%]
Logfile is /var/log/hp_qla2x00_install.log
Getting list of QLA FC HBAs
No QLA FC HBAs found on system; proceeding with installation
1:hp_qla2x00src ########################################### [100%]
No driver loaded, using failover mode
Writing new /etc/hp_qla2x00.conf...done
Copying /opt/hp/src/hp_qla2x00src/libqlsdm-ia32.so to /usr/lib/libqlsdm.so
Copying /opt/hp/src/hp_qla2x00src/libqlsdm-x86_64.so to /usr/lib64/libqlsdm-x86_64.so
Adding line for libqlsdm.so to /etc/hba.conf
Adding line for libqlsdm-x86_64.so to /etc/hba.conf
Kernel modules directory: /lib/modules/2.6.18-92.1.6.el5xen/kernel/drivers/scsi/qla2xxx
Kernel build directory: /lib/modules/2.6.18-92.1.6.el5xen/build

Enabling failover in /lib/modules/2.6.18-92.1.6.el5xen/build/.config
error: %post(hp_qla2x00src-8.01.06.01-12.noarch) scriptlet failed, signal 2
---------------------------------------------

any idea?
best regards

Re: error: %post(hp_qla2x00src-8.01.06.01-12.noarch) scriptlet failed, signal 2

Bharath_Pingali — Thu, 10 Jul 2008 11:29:37 GMT

Hello Costantina,

My understanding is that you need to have kernel source installed.

Can you check if "2.6.18-92.1.6.el5xen" Soruce rpm is installed?

Also, are you using XEN?

-Thank You
Bharath

Re: error: %post(hp_qla2x00src-8.01.06.01-12.noarch) scriptlet failed, signal 2

skt_skt — Thu, 10 Jul 2008 17:41:29 GMT

similar location

lrwxrwxrwx 1 root root 33 Jul 6 01:44 /lib/modules/2.4.9-e.72enterprise/build -> ../../../usr/src/linux-2.4.9-e.72

Re: error: %post(hp_qla2x00src-8.01.06.01-12.noarch) scriptlet failed, signal 2

Costantina Caruso — Mon, 21 Jul 2008 08:56:00 GMT

I have not solved the problem yet
but I have discovered that
the HBA driver supplied is for A7523A FC Adapter which is guaranteed for 32-bit Linux
while we have a 64-bit SO

I wait for a 64-bit driver for this adapter

best regards