https://community.hpe.com/t5/operating-system-linux/eml-rev-1126-on-sles9/m-p/4231396#M33149 I have an EML media changer on sles-9 and the tape drives associated can be seen by my system but not recognized by data protector ... is there a specific firmware level that I should be at or is there additional drivers/software that I need to install to enable my storage device system ? Here is the relevant content of /proc/scsi/scsi:<BR /><BR />Host: scsi0 Channel: 00 Id: 00 Lun: 00<BR /> Vendor: HP Model: EML E-Series Rev: 1126<BR /> Type: Medium Changer ANSI SCSI revision: 05<BR /><BR /><BR />thanx<BR />stephen.harad@yesbank.com Thu, 10 Jul 2008 15:07:20 GMT Stephen Harad_2 2008-07-10T15:07:20Z https://community.hpe.com/t5/operating-system-linux/eml-rev-1126-on-sles9/m-p/4231396#M33149 I have an EML media changer on sles-9 and the tape drives associated can be seen by my system but not recognized by data protector ... is there a specific firmware level that I should be at or is there additional drivers/software that I need to install to enable my storage device system ? Here is the relevant content of /proc/scsi/scsi:<BR /><BR />Host: scsi0 Channel: 00 Id: 00 Lun: 00<BR /> Vendor: HP Model: EML E-Series Rev: 1126<BR /> Type: Medium Changer ANSI SCSI revision: 05<BR /><BR /><BR />thanx<BR />stephen.harad@yesbank.com Thu, 10 Jul 2008 15:07:20 GMT https://community.hpe.com/t5/operating-system-linux/eml-rev-1126-on-sles9/m-p/4231396#M33149 Stephen Harad_2 2008-07-10T15:07:20Z