https://community.hpe.com/t5/operating-system-linux/hardware-recognize/m-p/4307158#M34445 1. Remove the unwanted module from the system using<BR /><BR /># modprobe -r <MODULE name=""><BR /><BR />or <BR /><BR /># rmmod <MODULE name=""><BR /><BR />2. Load the device module using command<BR /><BR /># insmod <MODULE name=""><BR /><BR />or <BR /><BR /># modprobe <BR /><BR /></MODULE></MODULE></MODULE> Mon, 17 Nov 2008 08:50:53 GMT Khalique 2008-11-17T08:50:53Z https://community.hpe.com/t5/operating-system-linux/hardware-recognize/m-p/4307157#M34444 I have pluged the and controller card and autoloader to the RH server , but I found that the server recognize it as a wrong model , so I would like to re-do the recognize , except unplug the hardware , how can I remove the record in the server , and then re-do the recognize ?<BR /><BR />thx Mon, 17 Nov 2008 04:12:41 GMT https://community.hpe.com/t5/operating-system-linux/hardware-recognize/m-p/4307157#M34444 heaman1 2008-11-17T04:12:41Z https://community.hpe.com/t5/operating-system-linux/hardware-recognize/m-p/4307158#M34445 1. Remove the unwanted module from the system using<BR /><BR /># modprobe -r <MODULE name=""><BR /><BR />or <BR /><BR /># rmmod <MODULE name=""><BR /><BR />2. Load the device module using command<BR /><BR /># insmod <MODULE name=""><BR /><BR />or <BR /><BR /># modprobe <BR /><BR /></MODULE></MODULE></MODULE> Mon, 17 Nov 2008 08:50:53 GMT https://community.hpe.com/t5/operating-system-linux/hardware-recognize/m-p/4307158#M34445 Khalique 2008-11-17T08:50:53Z