topic Re: How do I mount a NTFS partition with rw support? in Operating System - Linux

How do I mount a NTFS partition with rw support?

James_173 — Fri, 24 Jan 2003 03:52:29 GMT

Hello,

I have two disk,one installed RH8 and another install W2k server with NTFS.I want to mount NTFS partition under linux with write support.I compiled my kernel with NTFS file system support(read only) to M and NTFS write support to Y.I boot my system with the new kernel.But when I try to mount the Ntfs partition,the system tell me the partition is read-only.

Is there anything I need do to get my purpose.Thanks for your help.

Best regards,
James

Re: How do I mount a NTFS partition with rw support?

Stuart Browne — Fri, 24 Jan 2003 04:44:21 GMT

You said you built in NFS write support with a new kernel build? Did you also rebuilt and install all of the modules?

Is the NTFS module inserted when you try mount?

How are you mounting ? Are you using "-o rw", or is it already mounted?

Sorry for the questions, just trying to get a clear picture of whats happening.

Re: How do I mount a NTFS partition with rw support?

James_173 — Fri, 24 Jan 2003 06:46:33 GMT

Dear Stuart,

Thanks for your quick response.I try to make it more clear about the question you asked.

1.I did install the all modules by using make modules and make modules_install commands.

2.The attached file is the output by issue lsmod.

3.I use that command to mount the ntfs partition,
mount -t ntfs -o rw /dev/sdb1 /mnt

After that,I can get into the /mnt and see all the files.But I can't write the boot.ini file.

I am looking forward to your reply. Thanks again.

James

Re: How do I mount a NTFS partition with rw support?

James_173 — Fri, 24 Jan 2003 06:53:59 GMT

Sorry,I forget to attach file.

Re: How do I mount a NTFS partition with rw support?

Chakravarthi — Fri, 24 Jan 2003 07:38:25 GMT

i think boot.ini is a hidden file, in windows, change the permissions in windows and then try

Re: How do I mount a NTFS partition with rw support?

James_173 — Fri, 24 Jan 2003 08:16:27 GMT

Dear chakravarthi,

I am afraid it isn't root cause to my question.When I get into the /mnt,I see all the files were set to -rw-------,all directorys were set to drwx------.

Thanks for your help.

James

Re: How do I mount a NTFS partition with rw support?

Chakravarthi — Fri, 24 Jan 2003 09:13:11 GMT

who is the owner of the files,,

the user who mounts it, should be able to view it,,,,

Re: How do I mount a NTFS partition with rw support?

U.SivaKumar_2 — Fri, 24 Jan 2003 09:23:42 GMT

Hi ,

The Project says that Write support is not fully functional and will have problems on machines with SMP ( Multi-processors ).

regards,
U.SivaKumar

Re: How do I mount a NTFS partition with rw support?

James_173 — Wed, 29 Jan 2003 02:44:40 GMT

Hello,

I think U.SivaKumar is right.

BTW,I found a way to get write support.
1.mount -t ntfs /dev/sdb1 /mnt
2.mount -o remount,rw /dev/sdb1 /mnt

Maybe others have different result with me.

Regards,
James

Re: How do I mount a NTFS partition with rw support?

Jon_87 — Wed, 05 Mar 2003 07:27:24 GMT

SuSE 8 seems to have this in the Desktop version built in BTW

Re: How do I mount a NTFS partition with rw support?

James_173 — Thu, 06 Mar 2003 06:32:40 GMT

I am sorry I forgot to assign points to people who help me.Thank all of you again.

Regards,

James

Re: How do I mount a NTFS partition with rw support?

md wills — Fri, 07 Mar 2003 18:22:06 GMT

I have recently seen this discussion on another list. I think you have to mount the drive as such

mount -t ntfs /dev/device /filesystem-mountpoint -o uid=root -o gid=root -o umask=022

A good place to readup on this would be http://linux-ntfs.sourceforge.net/info/ntfs.html#4.1

Hope this helps.