topic Re: PSP 8.20, RHEL 5.3 and hp-fibreutils in Operating System - Linux

PSP 8.20, RHEL 5.3 and hp-fibreutils

Brem Belguebli — Fri, 17 Apr 2009 18:27:03 GMT

Hi,

After installing PSP 8.20 on a RHEL 5.3 box, the PSP package hp-fibreutils doesn't get installed.

Any ideas ?

Thx

Re: PSP 8.20, RHEL 5.3 and hp-fibreutils

Steven McCoy — Fri, 17 Apr 2009 18:38:56 GMT

I think fibreutils is obsoleted by device-mapper-multipath in RHEL 5.3.

Re: PSP 8.20, RHEL 5.3 and hp-fibreutils

Brem Belguebli — Fri, 17 Apr 2009 21:04:29 GMT

Hi,

You may be right for some functionnalities, but there are some useful programs such as scsi_info that are no more available.

On RHEL 5.2, dm-multipath and hp-fibreutils (8.15) lived well together.
Thx

Re: PSP 8.20, RHEL 5.3 and hp-fibreutils

Ed Barnum — Fri, 17 Apr 2009 22:03:11 GMT

The fibreutils package was recently made available for 5.3. Here is a pointer to the Qlogic kit:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12169&prodSeriesId=1809835&prodNameId=1809832&swEnvOID=4004&swLang=8&mode=2&taskId=135&swItem=co-69763-1

Re: PSP 8.20, RHEL 5.3 and hp-fibreutils

Jimmy Vance — Wed, 13 May 2009 11:39:37 GMT

The last post pointed to SanSurfer. The new fibreutils package that works with RHEL 5.3 is in the hp-fc-enablement package located here

For Qlogic
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=3709945&prodSeriesId=1844104&prodNameId=1844105&swEnvOID=4004&swLang=8&mode=2&taskId=135&swItem=co-69719-1

For Emulex
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=co-69655-1&jumpid=reg_R1002_USEN

Re: PSP 8.20, RHEL 5.3 and hp-fibreutils

Brem Belguebli — Wed, 13 May 2009 11:53:38 GMT

Thanks,

I'll check this out.

We have anyway worked around the issue.

Thread Closed

Re: PSP 8.20, RHEL 5.3 and hp-fibreutils

Joshua Baldock — Thu, 21 May 2009 05:36:50 GMT

Can I ask why the Multipath Device Mapper Kit isn't supplied in the HP PSP 8.20 pack?

I know you can configure the fiber cards without this kit, however they make scanning the LUNs and providing the WWN's alot easier.

Re: PSP 8.20, RHEL 5.3 and hp-fibreutils

Jimmy Vance — Thu, 21 May 2009 11:36:55 GMT

"Can I ask why the Multipath Device Mapper Kit isn't supplied in the HP PSP 8.20 pack?

I know you can configure the fiber cards without this kit, however they make scanning the LUNs and providing the WWN's alot easier. "

Good queestion/suggestion, I'll pass it up the chain.

With the newer distributions the only thing the HPDMmultipath kit provides is a multipath.conf file. Older distributions needed modifications to some of the device mapper executables. Those changes were adopted by the upstream maintainers of the code so there is not a need for HP specific binaries now.

The fibreutils package isn't in the HPDMmultipath kit, so there is no help in scanning for LUNS. fibreutils which contains "hp_rescan" is included with the PSP. Version 3.x of fibreutils will be in a future release.

The newer distributions (RHEL5.x, SLES10.x)put information in /sys/class/scsi_host/ instead of /proc/scsi/ so the scripts/tools for hp_rescan had to be updated to reflect the change. fibreutils.3.x is available in the hp-fc-enablement package referenced in an earlier post for both RHEL and SLES.