https://community.hpe.com/t5/operating-system-linux/hp-integrity-itanium-redhat-linux-5-3-and-eva-5000/m-p/4493120#M38159 Have your configured correctly your host and host type on the storage? Where you able to select the server's hba from the dropdown list?<BR /><BR />There are some things you need to check, sometimes, the LUNs are not detected unless you reboot the server.<BR /><BR />Check also the attached file and try to find a new version of the same document if available. Mon, 07 Sep 2009 21:22:07 GMT Ivan Ferreira 2009-09-07T21:22:07Z https://community.hpe.com/t5/operating-system-linux/hp-integrity-itanium-redhat-linux-5-3-and-eva-5000/m-p/4493119#M38158 Hi all,<BR /><BR />I have a new hardware HP integrity server itanium processor installed with REDHAT Itanium lInux 5.3,which has Qlogic HBA card. We have an EVA 5000 SAN Storage running since years. I am trying to present the disk to this Itanium Server, but its not getting viewed/scanned. Fibre Link is OK. Does the EVA 5000 support Redhat Itanium linux? May anyone suggest on this ? <BR /><BR />Thanks <BR />Azad Mon, 07 Sep 2009 19:42:11 GMT https://community.hpe.com/t5/operating-system-linux/hp-integrity-itanium-redhat-linux-5-3-and-eva-5000/m-p/4493119#M38158 pandora_1 2009-09-07T19:42:11Z https://community.hpe.com/t5/operating-system-linux/hp-integrity-itanium-redhat-linux-5-3-and-eva-5000/m-p/4493120#M38159 Have your configured correctly your host and host type on the storage? Where you able to select the server's hba from the dropdown list?<BR /><BR />There are some things you need to check, sometimes, the LUNs are not detected unless you reboot the server.<BR /><BR />Check also the attached file and try to find a new version of the same document if available. Mon, 07 Sep 2009 21:22:07 GMT https://community.hpe.com/t5/operating-system-linux/hp-integrity-itanium-redhat-linux-5-3-and-eva-5000/m-p/4493120#M38159 Ivan Ferreira 2009-09-07T21:22:07Z