topic Re: ubuntu in ML350 G6 server - problem booting in Operating System - Linux

ubuntu in ML350 G6 server - problem booting

chowtaMah — Thu, 24 Sep 2009 05:59:06 GMT

We are installing ubuntu Server 9.04 in

ProLiant ML350G6(Tower Model) / Hot Plug LFF Model/(1) Quad-Core Intel Xeon E5504Processor (2.0GHz, 80 Watts, )/ 4MB Level 3 cache / 4GB (2 x 2 GB) PC3-10600R (DDR3-1333) Registered DIMMS /Embedded NC326i Dual port Gigabit Server Adapter / Smart Array P410i with no memory/ DVD ROM Drive/460 Watt Power Supply/ 4TB sata hard disks.

Installation went well. But at booting I get this,

LILO 22.8 Load i Linux...............................
.............
.............
BIOS data check successful

PANIC: early exception 0e rip 10:ffffffff80226aa3 error 0 cr2 ffffffffff5fc0f0

How I can continue? Please Help me.

Re: ubuntu in ML350 G6 server - problem booting

Michal Kapalka (mikap) — Thu, 24 Sep 2009 06:23:06 GMT

hi,

ubuntu forum is the best way, but i found, that you did it already :

http://ubuntuforums.org/showthread.php?p=7993300

mikap

Re: ubuntu in ML350 G6 server - problem booting

Robert Deming — Mon, 28 Sep 2009 11:01:47 GMT

I recently installed the amd64 version of Ubuntu 9.04 server on my ml370 g6. Instead of LILO I used grub. I've had no panics on the system. (All my selections during the install were default.) My hardware differences are (6GB unregistered, L5520, 36gig sas, nc375i).

I cannot suggest how to analyze the panic,

You might consider using adm64 if you aren't already; also try using grub.

During the first one or two installations, I did run into problems by selecting non-default choices which resulted in grub not installing. However, once the system was up, I've had no problems installing software, or upgrading the kernel to something more recent.

robert

Re: ubuntu in ML350 G6 server - problem booting

Michal Kapalka (mikap) — Mon, 28 Sep 2009 11:03:11 GMT

hi,

grub is the default boot manager on ubuntu.

mikap

Re: ubuntu in ML350 G6 server - problem booting

chowtaMah — Tue, 29 Sep 2009 03:44:20 GMT

I continuted with LILO. While installing I selected manual partion option. After that ubuntu boot was successful. Now I can upgrade and install software without any problem.

Thank all for your support.