https://community.hpe.com/t5/operating-system-linux/error-recognizing-san-lun-bl260-centos5-3/m-p/4507056#M38420 <!--!*#-->Hello,<BR />When I map the LUN to the switch of the c7000 where there is a BL260c G5 i make the command: /opt/hp/hp_fibreutils/lssg <BR />and it shows: <BR />sg0 0,0,0,0 ATA GJ0250EAGSQ HPG2 <BR />sg1 1,0,0,0 ATA GJ0250EAGSQ HPG2 <BR />sg2 4,0,0,0 SUN CSM200_R 0660 <BR />sg3 5,0,0,0 SUN CSM200_R 0660 <BR /> <BR />Which in some case i think its recognizing the Storage SUN StorageTeck 6140. <BR /> <BR />When i do the fdisk -l; it doesn't show anything? <BR /><BR />After restarting the server, when it start booting the server show the error attached as a picture, where it says there is an I/O error with the device dev sdd. <BR /><BR />When I plug out the LUNs of the SAN, the server boots normaly.<BR /> <BR />I'll be waiting for your response,<BR /><BR />Tanks Fri, 02 Oct 2009 14:31:40 GMT Pabs2000_1 2009-10-02T14:31:40Z https://community.hpe.com/t5/operating-system-linux/error-recognizing-san-lun-bl260-centos5-3/m-p/4507056#M38420 <!--!*#-->Hello,<BR />When I map the LUN to the switch of the c7000 where there is a BL260c G5 i make the command: /opt/hp/hp_fibreutils/lssg <BR />and it shows: <BR />sg0 0,0,0,0 ATA GJ0250EAGSQ HPG2 <BR />sg1 1,0,0,0 ATA GJ0250EAGSQ HPG2 <BR />sg2 4,0,0,0 SUN CSM200_R 0660 <BR />sg3 5,0,0,0 SUN CSM200_R 0660 <BR /> <BR />Which in some case i think its recognizing the Storage SUN StorageTeck 6140. <BR /> <BR />When i do the fdisk -l; it doesn't show anything? <BR /><BR />After restarting the server, when it start booting the server show the error attached as a picture, where it says there is an I/O error with the device dev sdd. <BR /><BR />When I plug out the LUNs of the SAN, the server boots normaly.<BR /> <BR />I'll be waiting for your response,<BR /><BR />Tanks Fri, 02 Oct 2009 14:31:40 GMT https://community.hpe.com/t5/operating-system-linux/error-recognizing-san-lun-bl260-centos5-3/m-p/4507056#M38420 Pabs2000_1 2009-10-02T14:31:40Z