topic Re: Nagios NRPE issue on RHEL5U3 in Operating System - Linux

Nagios NRPE issue on RHEL5U3

Mostafa Yasin — Thu, 21 Jan 2010 14:14:11 GMT

Dear Sir;
I have installed nagios-plugins-1.4.13 and NRPE-2.12 on Redhat Enterprise Linux 5.3.
When i execute the following command as root: /usr/local/nagios/libexec/check_nrpe -H localhost -c check_users
i get the following error on the terminal:
NRPE: Unable to read output

When i examine /var/log/message file i found this error message:
Jan 21 15:24:05 sv-t-house-nat xinetd[15912]: START: nrpe pid=21606 from=127.0.0.1 Jan 21 15:24:05 sv-t-house-nat kernel: check_users[21608]: segfault at 00000000b1362ea8 rip 0000000000402c17 rsp 00000000b1362e84 error 4 Jan 21 15:24:05 sv-t-house-nat xinetd[15912]: EXIT: nrpe status=0 pid=21606 duration=0(sec)

Could you please tell me how to solve this problem?

Best Regards..

Re: Nagios NRPE issue on RHEL5U3

Steven E. Protter — Thu, 21 Jan 2010 15:02:50 GMT

Shalom,

This looks like bad software to me. Segment fault usually comes from software that has problems not caught in quality assurrance.

I'd look for different versions of either the nagios plugins or NPRE

SEP

Re: Nagios NRPE issue on RHEL5U3

Mostafa Yasin — Thu, 21 Jan 2010 16:43:15 GMT

Thank you very much Mr. Steven

I change the nagios plugins version to nagios-plugins-1.4.14. and the problem is solved.

Thanks again