https://community.hpe.com/t5/operating-system-linux/p800-doesn-t-show-physical-drive-location/m-p/4601804#M40140 Shalom,<BR /><BR />Key facts:<BR /><BR /> OS partitioned it and seems to be happy.<BR /><BR /><BR />Maybe run some dd read tests on all disks and make sure they function.<BR /><BR />SEP Tue, 16 Mar 2010 17:47:54 GMT Steven E. Protter 2010-03-16T17:47:54Z https://community.hpe.com/t5/operating-system-linux/p800-doesn-t-show-physical-drive-location/m-p/4601803#M40139 I've got a p800 in a DL580 G2 connected to a Sun J4400 JBOD and I've been able to create an array which appears to be fine. OS partitioned it and seems to be happy.<BR /><BR />But if I look at the controller config with hpacucli it shows all the physicaldrive as 0:0 (box 0:bay 0). With the exception of 1E:1:9 and 1E:1:10. This is also true in the controller ROM config util.<BR /><BR />I'm not sure this is something I should ignore or not.<BR /><BR />Thanks! Tue, 16 Mar 2010 15:56:09 GMT https://community.hpe.com/t5/operating-system-linux/p800-doesn-t-show-physical-drive-location/m-p/4601803#M40139 Derek Harkness 2010-03-16T15:56:09Z https://community.hpe.com/t5/operating-system-linux/p800-doesn-t-show-physical-drive-location/m-p/4601804#M40140 Shalom,<BR /><BR />Key facts:<BR /><BR /> OS partitioned it and seems to be happy.<BR /><BR /><BR />Maybe run some dd read tests on all disks and make sure they function.<BR /><BR />SEP Tue, 16 Mar 2010 17:47:54 GMT https://community.hpe.com/t5/operating-system-linux/p800-doesn-t-show-physical-drive-location/m-p/4601804#M40140 Steven E. Protter 2010-03-16T17:47:54Z