https://community.hpe.com/t5/operating-system-linux/hp-agents-6-20-and-rh-8-0-rebuild-module-problem/m-p/2937181#M4038 I've installed RH 8.0 on a Proliant DL380 G2 and patched the kernel to 2.4.18-27.8.0. <BR /><BR />I've then installed HP agents 6.20 by running install.sh on the management CD. SNMP installs beautifully but HPASM (health) and HPRSM complains about the source is not installed so the module can not be rebuild?! I've installed the source in /usr/src as described by Redhat. <BR />The Web agent seem to work and I can reboot the server from the web but the HP drivers dosn't take control over the fans and it dosn't register a defect fan og PS. <BR /><BR />Regards <BR />Jesper Thu, 27 Mar 2003 14:08:28 GMT Jesper Taanum-Willumsen 2003-03-27T14:08:28Z https://community.hpe.com/t5/operating-system-linux/hp-agents-6-20-and-rh-8-0-rebuild-module-problem/m-p/2937181#M4038 I've installed RH 8.0 on a Proliant DL380 G2 and patched the kernel to 2.4.18-27.8.0. <BR /><BR />I've then installed HP agents 6.20 by running install.sh on the management CD. SNMP installs beautifully but HPASM (health) and HPRSM complains about the source is not installed so the module can not be rebuild?! I've installed the source in /usr/src as described by Redhat. <BR />The Web agent seem to work and I can reboot the server from the web but the HP drivers dosn't take control over the fans and it dosn't register a defect fan og PS. <BR /><BR />Regards <BR />Jesper Thu, 27 Mar 2003 14:08:28 GMT https://community.hpe.com/t5/operating-system-linux/hp-agents-6-20-and-rh-8-0-rebuild-module-problem/m-p/2937181#M4038 Jesper Taanum-Willumsen 2003-03-27T14:08:28Z https://community.hpe.com/t5/operating-system-linux/hp-agents-6-20-and-rh-8-0-rebuild-module-problem/m-p/2937182#M4039 Dumb question. Is 'gcc' installed? Thu, 27 Mar 2003 21:56:28 GMT https://community.hpe.com/t5/operating-system-linux/hp-agents-6-20-and-rh-8-0-rebuild-module-problem/m-p/2937182#M4039 Stuart Browne 2003-03-27T21:56:28Z