https://community.hpe.com/t5/operating-system-linux/confirguring-the-qlogic-hba-card-in-debian-lenny/m-p/4618742#M40478 I have installed debian lenny 5.0.4 on hp dl380 g6. could any one please guide me, do i have to install any package to manage the Qlogic HBA, I'm new to debian and HBA configuration<BR /><BR />hostname:~# lspci | grep -i fibre<BR />0a:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)<BR />0d:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)<BR />hostname:/# dmesg | grep -i qlogic<BR />[ 3.608270] QLogic Fibre Channel HBA Driver: 8.02.01-k4<BR />[ 4.472680] QLogic Fibre Channel HBA Driver: 8.02.01-k4<BR />[ 4.472680] QLogic HPAK344A -<BR />[ 4.654865] QLogic Fibre Channel HBA Driver: 8.02.01-k4<BR />[ 4.654865] QLogic HPAK344A -<BR /><BR />hostname:~#dmesg | grep qla2x<BR />[ 4.253274] qla2xxx 0000:0a:00.0: Found an ISP2532, irq 31, iobase 0xf88f0000<BR />[ 4.253274] qla2xxx 0000:0a:00.0: Configuring PCI space...<BR />[ 4.253274] qla2xxx 0000:0a:00.0: Configure NVRAM parameters...<BR />[ 4.253274] qla2xxx 0000:0a:00.0: Verifying loaded RISC code...<BR />[ 4.425249] qla2xxx 0000:0a:00.0: Allocated (64 KB) for EFT...<BR />[ 4.441122] qla2xxx 0000:0a:00.0: Allocated (64 KB) for FCE...<BR />[ 4.441122] qla2xxx 0000:0a:00.0: Allocated (1478 KB) for firmware dump...<BR />[ 4.472655] scsi0 : qla2xxx<BR />[ 4.472680] qla2xxx 0000:0a:00.0:<BR />[ 4.472680] qla2xxx 0000:0d:00.0: Found an ISP2532, irq 30, iobase 0xf88f4000<BR />[ 4.472680] qla2xxx 0000:0d:00.0: Configuring PCI space...<BR />[ 4.472680] qla2xxx 0000:0d:00.0: Configure NVRAM parameters...<BR />[ 4.472680] qla2xxx 0000:0d:00.0: Verifying loaded RISC code...<BR />[ 4.587391] qla2xxx 0000:0d:00.0: Allocated (64 KB) for EFT...<BR />[ 4.603308] qla2xxx 0000:0d:00.0: Allocated (64 KB) for FCE...<BR />[ 4.603308] qla2xxx 0000:0d:00.0: Allocated (1478 KB) for firmware dump...<BR />[ 4.654816] scsi3 : qla2xxx<BR />[ 4.654865] qla2xxx 0000:0d:00.0:<BR />[ 27.692870] qla2xxx 0000:0a:00.0: Cable is unplugged...<BR />[ 27.862685] qla2xxx 0000:0d:00.0: Cable is unplugged...<BR /><BR />Storage Team confirmed the cable is connect and server logged into the SAN switches as G-port = not working properly, and they requested to modify the below -<BR />- change the speed to 4 Gb/s<BR />- configure the login mode to Fabric First<BR /><BR />please guide me how i can modify this setting, and step-by-step configuration what i have to do in debian and my storage array is EMC DMX3950.<BR /><BR />Thanks in advance.<BR />Veera<BR /> Fri, 16 Apr 2010 02:52:04 GMT veerahp 2010-04-16T02:52:04Z https://community.hpe.com/t5/operating-system-linux/confirguring-the-qlogic-hba-card-in-debian-lenny/m-p/4618742#M40478 I have installed debian lenny 5.0.4 on hp dl380 g6. could any one please guide me, do i have to install any package to manage the Qlogic HBA, I'm new to debian and HBA configuration<BR /><BR />hostname:~# lspci | grep -i fibre<BR />0a:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)<BR />0d:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)<BR />hostname:/# dmesg | grep -i qlogic<BR />[ 3.608270] QLogic Fibre Channel HBA Driver: 8.02.01-k4<BR />[ 4.472680] QLogic Fibre Channel HBA Driver: 8.02.01-k4<BR />[ 4.472680] QLogic HPAK344A -<BR />[ 4.654865] QLogic Fibre Channel HBA Driver: 8.02.01-k4<BR />[ 4.654865] QLogic HPAK344A -<BR /><BR />hostname:~#dmesg | grep qla2x<BR />[ 4.253274] qla2xxx 0000:0a:00.0: Found an ISP2532, irq 31, iobase 0xf88f0000<BR />[ 4.253274] qla2xxx 0000:0a:00.0: Configuring PCI space...<BR />[ 4.253274] qla2xxx 0000:0a:00.0: Configure NVRAM parameters...<BR />[ 4.253274] qla2xxx 0000:0a:00.0: Verifying loaded RISC code...<BR />[ 4.425249] qla2xxx 0000:0a:00.0: Allocated (64 KB) for EFT...<BR />[ 4.441122] qla2xxx 0000:0a:00.0: Allocated (64 KB) for FCE...<BR />[ 4.441122] qla2xxx 0000:0a:00.0: Allocated (1478 KB) for firmware dump...<BR />[ 4.472655] scsi0 : qla2xxx<BR />[ 4.472680] qla2xxx 0000:0a:00.0:<BR />[ 4.472680] qla2xxx 0000:0d:00.0: Found an ISP2532, irq 30, iobase 0xf88f4000<BR />[ 4.472680] qla2xxx 0000:0d:00.0: Configuring PCI space...<BR />[ 4.472680] qla2xxx 0000:0d:00.0: Configure NVRAM parameters...<BR />[ 4.472680] qla2xxx 0000:0d:00.0: Verifying loaded RISC code...<BR />[ 4.587391] qla2xxx 0000:0d:00.0: Allocated (64 KB) for EFT...<BR />[ 4.603308] qla2xxx 0000:0d:00.0: Allocated (64 KB) for FCE...<BR />[ 4.603308] qla2xxx 0000:0d:00.0: Allocated (1478 KB) for firmware dump...<BR />[ 4.654816] scsi3 : qla2xxx<BR />[ 4.654865] qla2xxx 0000:0d:00.0:<BR />[ 27.692870] qla2xxx 0000:0a:00.0: Cable is unplugged...<BR />[ 27.862685] qla2xxx 0000:0d:00.0: Cable is unplugged...<BR /><BR />Storage Team confirmed the cable is connect and server logged into the SAN switches as G-port = not working properly, and they requested to modify the below -<BR />- change the speed to 4 Gb/s<BR />- configure the login mode to Fabric First<BR /><BR />please guide me how i can modify this setting, and step-by-step configuration what i have to do in debian and my storage array is EMC DMX3950.<BR /><BR />Thanks in advance.<BR />Veera<BR /> Fri, 16 Apr 2010 02:52:04 GMT https://community.hpe.com/t5/operating-system-linux/confirguring-the-qlogic-hba-card-in-debian-lenny/m-p/4618742#M40478 veerahp 2010-04-16T02:52:04Z https://community.hpe.com/t5/operating-system-linux/confirguring-the-qlogic-hba-card-in-debian-lenny/m-p/4618743#M40479 hi,<BR /><BR />check this document :<BR /><BR /><A href="http://www.scribd.com/doc/3071066/EMC-Host-Connectivity-Guide-for-Linux" target="_blank">http://www.scribd.com/doc/3071066/EMC-Host-Connectivity-Guide-for-Linux</A><BR /><BR />mikap Fri, 16 Apr 2010 04:11:31 GMT https://community.hpe.com/t5/operating-system-linux/confirguring-the-qlogic-hba-card-in-debian-lenny/m-p/4618743#M40479 Michal Kapalka (mikap) 2010-04-16T04:11:31Z