topic Re: Can't find an ext2 filesystem on dev loop0. in Operating System - Linux

Can't find an ext2 filesystem on dev loop0.

Booting issue in rx2660 — Wed, 26 May 2010 13:37:44 GMT

Hi,

I am try to install the RHEL5.2 IA64 bit o/s on HP rx2660,The following error messages in your syslog indicate something very weird is
going on with your CD-ROM drive:

<5> Vendor: HL-DT-ST Model: LENOVO BURNER Rev: LI04
<5> Type: CD-ROM ANSI SCSI revision: 00
<4>sr0: scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray
<7>sr 6:0:0:0: Attached scsi CD-ROM sr0
<7>usb-storage: device scan complete
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<4>Unable to load NLS charset utf8
<4>Unable to load NLS charset utf8
<7>ISO 9660 Extensions: RRIP_1991A
<4>Unable to identify CD-ROM format.
<4>VFS: Can't find an ext2 filesystem on dev loop0.

Please help me to resolve this problem

Re: Can't find an ext2 filesystem on dev loop0.

Steven Schweda — Wed, 26 May 2010 14:25:24 GMT

> [...] RHEL5.2 [...]

Then it might make more sense to ask in a
Linux forum than in this HP-UX forum.

http://forums.itrc.hp.com/service/forums/familyhome.do?familyId=118

> I am try to install [...]

From what, exactly?

> <4>Unable to identify CD-ROM format.

Where did you get this CD/DVD?

Re: Can't find an ext2 filesystem on dev loop0.

Steven E. Protter — Wed, 26 May 2010 17:32:38 GMT

Shalom,

On this hardware you need to configure an EFI partition before you can boot/install a system.

You seem pretty confident you have IA-64 software but I'd ask how you burned the DVD.

This may be as simple though as bad media.

SEP