https://community.hpe.com/t5/operating-system-linux/scsi/m-p/2943663#M4111 The reason it takes long is because it scans for all SCSI devices on the bus.<BR />Make sure your SCSI bus is properly terminated (Read the manual that came with the card)<BR /> Fri, 04 Apr 2003 12:50:25 GMT James Wilson_5 2003-04-04T12:50:25Z https://community.hpe.com/t5/operating-system-linux/scsi/m-p/2943662#M4110 Hi All,<BR />why "insmod aic7xxx" take so long to insert the module?<BR /><BR />Module Size Used by<BR />aic7xxx 114576 1 (initializing)<BR /><BR />sometimes insmod can insert faster, but Unkown type scsi<BR /><BR />Host: scsi1 Channel: 00 Id: 03 Lun: 00<BR /> Vendor: P U Model: ltrium 1-SCSI N Rev: 23D<BR /> Type: Unknown ANSI SCSI revision: 01<BR /><BR />I remember I got this before, Type: Sequential-Access ANSI SCSI revision: 03 <BR /><BR />any idea?<BR /><BR />Thks.<BR />-h Fri, 04 Apr 2003 03:10:35 GMT https://community.hpe.com/t5/operating-system-linux/scsi/m-p/2943662#M4110 Hendra_3 2003-04-04T03:10:35Z https://community.hpe.com/t5/operating-system-linux/scsi/m-p/2943663#M4111 The reason it takes long is because it scans for all SCSI devices on the bus.<BR />Make sure your SCSI bus is properly terminated (Read the manual that came with the card)<BR /> Fri, 04 Apr 2003 12:50:25 GMT https://community.hpe.com/t5/operating-system-linux/scsi/m-p/2943663#M4111 James Wilson_5 2003-04-04T12:50:25Z