https://community.hpe.com/t5/operating-system-linux/smartmontools-smartd-conf/m-p/4707766#M42631 <!--!*#-->Hi,<BR />I am trying to get smartmontools to monitoring all my disks, I have 2 in the internal bays and 12 on the backplane both under the same controller. <BR />This are partition as <BR />/dev/cciss/c0d0px<BR />and<BR />/dev/cciss/c0d1px<BR /><BR />smartctl detects all these disks and they can be addressed like so;<BR />smartctl -a -d cciss,[0-13] /dev/cciss/c0d1 <BR /><BR />However in smartd.conf it fails to see any more than 2 physical disks using this type of addressing;<BR />/dev/cciss/c0d1 -d cciss,2 -a -s (L/../../7/05|S/../.././05) -m root<BR /><BR /><BR />Any suggestions on how to get smartd.conf to see more than the first 2 disks?<BR /><BR />Thanks<BR />T Mon, 01 Nov 2010 19:36:34 GMT TomHod2 2010-11-01T19:36:34Z https://community.hpe.com/t5/operating-system-linux/smartmontools-smartd-conf/m-p/4707766#M42631 <!--!*#-->Hi,<BR />I am trying to get smartmontools to monitoring all my disks, I have 2 in the internal bays and 12 on the backplane both under the same controller. <BR />This are partition as <BR />/dev/cciss/c0d0px<BR />and<BR />/dev/cciss/c0d1px<BR /><BR />smartctl detects all these disks and they can be addressed like so;<BR />smartctl -a -d cciss,[0-13] /dev/cciss/c0d1 <BR /><BR />However in smartd.conf it fails to see any more than 2 physical disks using this type of addressing;<BR />/dev/cciss/c0d1 -d cciss,2 -a -s (L/../../7/05|S/../.././05) -m root<BR /><BR /><BR />Any suggestions on how to get smartd.conf to see more than the first 2 disks?<BR /><BR />Thanks<BR />T Mon, 01 Nov 2010 19:36:34 GMT https://community.hpe.com/t5/operating-system-linux/smartmontools-smartd-conf/m-p/4707766#M42631 TomHod2 2010-11-01T19:36:34Z