topic Re: Redhat Enterprise WS Version 3 on DL380 G4 problem. in Operating System - Linux

Redhat Enterprise WS Version 3 on DL380 G4 problem.

Soon Chai Hsiung — Mon, 31 Jan 2005 02:41:40 GMT

Hi,

I am not able to install Redhat WS Version 3 on DL380 G4 because it is not detecting the 2 SCSI HDD. How do i go about now?

Is there any patches like update 3 need to be installed? Where to get these patches and how to pre-install it after I have configured RAID at BIOS.

Please advise. Thanks.

Re: Redhat Enterprise WS Version 3 on DL380 G4 problem.

Vitaly Karasik_1 — Mon, 31 Jan 2005 06:19:37 GMT

You should download ISO images of installation CDs for RHEL 3.0 WS update 4 from RHN site [rhn.redhat.com].

BTW, before Linux installation you should configure "logical disk[s]" using RAID's BIOS or RAID utility from SmartCD.

Re: Redhat Enterprise WS Version 3 on DL380 G4 problem.

Soon Chai Hsiung — Mon, 31 Jan 2005 07:28:08 GMT

Thanks for your reply.

By the way, I have encountered one problem reagrding to download the ISO images of installation CDs for RHEL 3.0 WS update 4.

I look for it at Channel tab. But, I can't the packages/errata regarding to the update 4.

Please advise. I really need help to install my new server.

reagrds.

Re: Redhat Enterprise WS Version 3 on DL380 G4 problem.

Vitaly Karasik_1 — Mon, 31 Jan 2005 09:02:19 GMT

under RHN you should go to channels/Red Hat Enterprise Linux WS (v. 3 for x86) /downloads

Under this page you'll see all RHEL 3.0 WS CDs [update 4,3,...]

Re: Redhat Enterprise WS Version 3 on DL380 G4 problem.

Ted M Johnson_1 — Tue, 01 Feb 2005 10:15:30 GMT

Channels (tab at the top)
Then click on "Easy ISO's" (link on the left side)

Red Hat Enterprise Linux WS (v. 4 for x86) Beta

Yes, its still Beta. If you don't really, really need RedHat try a different distro.

Re: Redhat Enterprise WS Version 3 on DL380 G4 problem.

Vitaly Karasik_1 — Tue, 01 Feb 2005 10:21:34 GMT

Ted, we're speaking not about RHEL 4.0, but about RHEL3.0 update 4...

Re: Redhat Enterprise WS Version 3 on DL380 G4 problem.

Soon Chai Hsiung — Wed, 02 Feb 2005 22:33:10 GMT

Hi,

I have tried to download ISO images from Fedora Project site. The ISO images are:
- FC3-x86_64-disc1.iso
- FC3-x86_64-disc2.iso
- FC3-x86_64-disc3.iso
- FC3-x86_64-disc4.iso

Then, I burned them into CD-R, respectively by using nero6 application.

I have tried to boot up from the 1st CD. But, it seems like couldn't be detected by the server.

Is there anything wrong from the steps?

Please advise.

Re: Redhat Enterprise WS Version 3 on DL380 G4 problem.

Vitaly Karasik_1 — Sun, 06 Feb 2005 04:14:07 GMT

1) you should check MD5 checksum [md5sum command] of *iso files

2) you should burn these files as images, not as files.

Re: Redhat Enterprise WS Version 3 on DL380 G4 problem.

Soon Chai Hsiung — Mon, 14 Feb 2005 06:29:02 GMT

Hi,

Thanks for all the valuable info.

I have successfully installed the Linux at HP G4 server by downloading the update 4 from RHN.

regards.

Re: Redhat Enterprise WS Version 3 on DL380 G4 problem.

Vitaly Karasik_1 — Mon, 14 Feb 2005 07:19:30 GMT

Congratulations!

BTW, we're waiting for *points*!

Re: Redhat Enterprise WS Version 3 on DL380 G4 problem.

Soon Chai Hsiung — Wed, 16 Feb 2005 22:11:15 GMT

We need Update 4 of Redhat Enterprise WS v.3 to install at HP Proliant DL380 G4.