https://community.hpe.com/t5/operating-system-linux/hp-990cxi-printing-lines-of-symbols-after-out-of-paper-restart/m-p/4936505#M46320 When the 990 ends up out of paper during a job, after putting more paper back in it prints out a line of characters over many pages before clearing itself. It is as if it is trying to print in the wrong format. I've tried changing drivers but to no effect. <BR /><BR />Any advice greatly appreciated.<BR /><BR />Ewan Wed, 26 Oct 2005 05:08:49 GMT Ewan Scott 2005-10-26T05:08:49Z https://community.hpe.com/t5/operating-system-linux/hp-990cxi-printing-lines-of-symbols-after-out-of-paper-restart/m-p/4936505#M46320 When the 990 ends up out of paper during a job, after putting more paper back in it prints out a line of characters over many pages before clearing itself. It is as if it is trying to print in the wrong format. I've tried changing drivers but to no effect. <BR /><BR />Any advice greatly appreciated.<BR /><BR />Ewan Wed, 26 Oct 2005 05:08:49 GMT https://community.hpe.com/t5/operating-system-linux/hp-990cxi-printing-lines-of-symbols-after-out-of-paper-restart/m-p/4936505#M46320 Ewan Scott 2005-10-26T05:08:49Z https://community.hpe.com/t5/operating-system-linux/hp-990cxi-printing-lines-of-symbols-after-out-of-paper-restart/m-p/4936506#M46321 entered into wrong forum in error Wed, 26 Oct 2005 05:10:11 GMT https://community.hpe.com/t5/operating-system-linux/hp-990cxi-printing-lines-of-symbols-after-out-of-paper-restart/m-p/4936506#M46321 Ewan Scott 2005-10-26T05:10:11Z