topic Re: Pbs embeded raid controler - proliant DL320 G4 in Operating System - Linux

Pbs embeded raid controler - proliant DL320 G4

Thierry Godin — Fri, 01 Dec 2006 20:57:52 GMT

Hi everybody,

I've tried to install the driver for the embeded raid controler (on Proliant DL320 G4)

======================
Os : RHEL4 U4
Kernel : 2.6.9-42.EL
PSP 7.60
2x SATA 80Go
RAID1
======================

The array is configured and enabled in BIOS.
The logical volume is recognised at startup.

So I've downloaded adpahci package (adpahci-1.2.5571-1.rhel4.i686.rpm) installed it ant after reboot the server freeze + black screen

The last post is "sda : asking for cache data failed"

Has somebody an idea ?

Thank You

Re: Pbs embeded raid controler - proliant DL320 G4

Steven E. Protter — Sun, 03 Dec 2006 16:03:20 GMT

Shalom,

Reinstall the OS, its trashed. Don't install the drive for the embedded raid controller. The one that ships with the system works quite well. I've got a number of such systems with DSL320 G4 in production. My ftp cluser runs on one, works very nicely without any change in drivers.

Call this adventure, a driver too far.

Its not a bad idea to isntall PSP 7.60 as you've done, it has some very nice feature. Beyond that, do the OS and make the system humm.

SEP

Re: Pbs embeded raid controler - proliant DL320 G4

Thierry Godin — Sun, 03 Dec 2006 16:29:33 GMT

Hi ,

Thank's for reply.

I've made a new full install of RHEL4 U4
but RHEL4 sees 2 sata HDD and not the volume array.

So I made manual partitionning and use only the first HDD (sda) .

That works . I've installed PSP 7.60 again.

Now , how do I verify that the raid 1 works ?

It seems that 2nd HDD (sdb) is empty.
Does it not beeing a clone of sda ??

(Hope you'll understand my bad english ...)

Re: Pbs embeded raid controler - proliant DL320 G4

Vitaly Karasik_1 — Mon, 04 Dec 2006 02:48:40 GMT

did you receive any messages during RPM install?
adpahci-1.2.5571-1.rhel4 should support RHEL4 upd4.

Re: Pbs embeded raid controler - proliant DL320 G4

Thierry Godin — Mon, 04 Dec 2006 06:26:03 GMT

For Vitaly :

Hi, and thank you for response.

No I had no message during RPM installation.

Anyway, I made an installation (as said above) and without the driver.

When I open the Hardware Browser in RHEL4, the intel SATA driver is well recognized. So thats seems good.

Now, I just want to know how to check the RAID 1 is working (or configure).
The second Hdd (sdb) is ever empty.

Re: Pbs embeded raid controler - proliant DL320 G4

Vitaly Karasik_1 — Mon, 04 Dec 2006 06:36:17 GMT

As far as I understand, you already configured RAID 1 via raid "BIOS".
The fact that your linux sees two harddisks instead of 1 (== RAID 1) says that your linux doesn't understand that there is RAID controller.
So we need to install adpahci in order to use this "hardware" RAID.
The other option is create mirror using linux software RAID.

Re: Pbs embeded raid controler - proliant DL320 G4

Alpha977 — Mon, 04 Dec 2006 07:58:52 GMT

Any message into the logs too? (/var/logs...)

Re: Pbs embeded raid controler - proliant DL320 G4

Thierry Godin — Mon, 04 Dec 2006 08:23:57 GMT

Alpha977 :
There is no message about that in /var/logs
(I've made a new install without the driver)

Vitaly :
That's what I had understood first . I need to install adpahci in order to RAID1 works .

I try again and post here asap.
(I found the floppy driver on Hp web.)

Thank's

Re: Pbs embeded raid controler - proliant DL320 G4

Thierry Godin — Mon, 04 Dec 2006 10:36:46 GMT

Now I've downloaded the software driver :

adpahci-1.2.5571-1.rhel4.i686.dd.gz

I made a diskette using Rawrite .
Then I reboot the server with RHEL4 CD1 and enter "linux updates dd" at prompt.

Then It ask me to load the diskette and press ENTER but It cannot load the driver.

The message is : Failed to mount updates disk.

I use a USB Floppy.

Re: Pbs embeded raid controler - proliant DL320 G4

Vitaly Karasik_1 — Mon, 04 Dec 2006 10:39:05 GMT

are you able to read files on floppy using other linux?

Re: Pbs embeded raid controler - proliant DL320 G4

Thierry Godin — Mon, 04 Dec 2006 11:13:49 GMT

Yes , it works on MDK 10.0 and Suse 10

Re: Pbs embeded raid controler - proliant DL320 G4

Mike Stroyan — Mon, 04 Dec 2006 15:55:51 GMT

The RHEL4 installer may not be able to use the particular USB floppy device or may need to have "legacy USB" support enabled in the BIOS to be able to use it during installation. There is some discussion of USB installation device issues at
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html
(although it doesn't get into any details on specific linux releases such as RHEL4). If the particular floppy drive is a source of trouble then you may have more success with a USB flash drive.

Re: Pbs embeded raid controler - proliant DL320 G4

Thierry Godin — Mon, 04 Dec 2006 19:07:39 GMT

Finally,

I've loaded the driver with the USB floppy.
(I made wrong manipulations before ....)

Now RHEL4 see only one drive labelled RAID-1

I make a complete installation.
It will be easy now.

Anyway,
Thanks a lot everybody for your useful help !

Re: Pbs embeded raid controler - proliant DL320 G4

Thierry Godin — Mon, 04 Dec 2006 20:05:04 GMT

Okay,
All works fine now .
The OS is installed, RAID-1 works too.

Thank you for your help.

Best regards
Thierry Godin

Re: Pbs embeded raid controler - proliant DL320 G4

Kal lim — Thu, 07 Jun 2007 06:10:30 GMT

Hi Thierry,

Can you post me the fix please? I have DL320 G5 and have created a floppy disketter from HP Embedded SATA RAID Controller Driver Diskette for Red Hat Enterprise Linux 4 (x86). However when using the disk I try to load the drive I get:
Failed to mount driver disk.
How did you get round the problem?