topic Re: shutdown & startup in Operating System - Linux

shutdown & startup

S.S. — Tue, 02 Mar 2010 03:29:33 GMT

Hi All,

A very simple question.
Due to UPS replacement we need to shutdown all the servers.
Would you help me for our Linux Server how can:
1. I safely shutdown & poweroff
2. Start up.

May i know like sam in hp-ux, do we have an GUI interface utility and also MP Console for Linux also?

Thanks & Regards

Re: shutdown & startup

Steven Schweda — Tue, 02 Mar 2010 04:07:35 GMT

> A very simple question.

Missing some very basic information.

> 1. I safely shutdown & poweroff

man shutdown

> 2. Start up.

What happens when you switch on the power?

> May i know [...] do we have [...]

May _we_ know something (anything) about your
hardware and/or which GNU/Linux kit you're
using?

uname -a

Re: shutdown & startup

S.S. — Tue, 02 Mar 2010 04:21:23 GMT

Hi,

$ uname -a
Linux oradb5 2.6.9-67.0.1.ELsmp #1 SMP Fri Nov 30 11:57:43 EST 2007 x86_64 x86_64 x86_64 GNU/Linux
$

Re: shutdown & startup

Michal Kapalka (mikap) — Tue, 02 Mar 2010 06:39:02 GMT

hi,

if you shutdown all running application ( for example SAP/oracle ) them just use command poweroff.

mikap

Re: shutdown & startup

Kapil Jha — Wed, 03 Mar 2010 09:22:37 GMT

shutdown -h now
or if you have iLO power it off from console.

Then after UPS thing power it up from server or from console again.

I hwish application this you would take care :)

BR,
Kapil+

Re: shutdown & startup

viswanathkishore — Wed, 03 Mar 2010 09:45:35 GMT

Hi ,
These are some commands for shutdown Process

Shutdown procedures:

halt, reboot, poweroff - stop the system.
SYNOPSIS
/sbin/halt [-n] [-w] [-d] [-f] [-i] [-p] [-h]
/sbin/reboot [-n] [-w] [-d] [-f] [-i]
/sbin/poweroff [-n] [-w] [-d] [-f] [-i] [-h]

Re: shutdown & startup

Arockiasamy — Thu, 04 Mar 2010 12:17:32 GMT

I'm giving graphical user environment
by http server.

After loading the server,
Just start the httpd service by
service httpd start

See the service is running or not by
nmap

If 80,443,8443 ports are opened http server ok.
If it showing command not found, then install nmap from installation disk.

Download the following file webmin

http://prdownloads.sourceforge.net/webadmin/webmin-1.500-1.noarch.rpm

install by
rpm -ivh webmin*

Verify by
nmap
service will open the port 10000

U can access the server by http server on port 10000.
like,go to web brownser in clients.
https://:10000

Re: shutdown & startup

S.S. — Tue, 16 Mar 2010 04:32:06 GMT

Thank you.