topic Re: Script to list "df -h" output in a single Line - Similar to bdfmegs.sh on RHEL in Operating System - Linux

Script to list "df -h" output in a single Line - Similar to bdfmegs.sh on RHEL

Kennedy G. Doss — Fri, 16 Nov 2012 02:05:13 GMT

Dear System Administrators:

On the HP-UX side of the house I have been using "bdfmegs.sh" script by Bill Hassel to obtain pleasant outputs in a single line. Is there anything similar to produce outputs on a LINUX Server? Any input from your end would be most appreciated.

Regards,

-Kennedy

P.S. This thread has been moved from HP-UX > System Administration to Linux > sysadmin - HP Forums Moderator

Re: Script to list "df -h" output in a single Line - Similar to bdfmegs.sh on RHEL

Patrick Wallek — Thu, 15 Nov 2012 15:06:23 GMT

No need for a special script. Just add the '-P' to your df command.

[root@rh6x ~]# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/vg_atl10rh6x-lv_root
                      5.5G  1.3G  4.0G  24% /
tmpfs                1004M     0 1004M   0% /dev/shm
/dev/sda1             485M   30M  430M   7% /boot


[root@rh6x ~]# df -Ph
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/vg_atl10rh6x-lv_root  5.5G  1.3G  4.0G  24% /
tmpfs                1004M     0 1004M   0% /dev/shm
/dev/sda1             485M   30M  430M   7% /boot

It's not quite as pretty, but the information is all on one line.

Re: Script to list "df -h" output in a single Line - Similar to bdfmegs.sh on RHEL

Kennedy G. Doss — Thu, 15 Nov 2012 15:24:27 GMT

Thanks a lot. That helps! Thanks for taking the time and writing back.

Re: Script to list "df -h" output in a single Line - Similar to bdfmegs.sh on RHEL

RAJD1 — Thu, 15 Nov 2012 19:23:20 GMT

Hi Kennedy,

You can try something like this , adding to Patrick's command, to get more alligned output with your df command:

(I dont have system to test it now , but you can give it a try, )

# df -Ph | awk '{printf "%-35s%-10s%-10s%-10s%-5s%s",$1,$2,$3,$4,$5,$6}'

Hth,

Raj D.

Re: Script to list "df -h" output in a single Line - Similar to bdfmegs.sh on RHEL

Patrick Wallek — Thu, 15 Nov 2012 19:28:11 GMT

You were close with:

df -Ph | awk '{printf "%-35s%-10s%-10s%-10s%-5s%s",$1,$2,$3,$4,$5,$6}'

You just need a "\n" to add a new line.

df -Ph | awk '{printf "%-35s%-10s%-10s%-10s%-5s%s\n",$1,$2,$3,$4,$5,$6}'

Re: Script to list "df -h" output in a single Line - Similar to bdfmegs.sh on RHEL

Kennedy G. Doss — Thu, 15 Nov 2012 19:54:28 GMT

Thanks a lot Patrick. Now my outputs look way better!!

Re: Script to list "df -h" output in a single Line - Similar to bdfmegs.sh on RHEL

Kennedy G. Doss — Thu, 15 Nov 2012 19:55:46 GMT

Thanks a lot for the suggestion Raj. I really appreciate you taking the time and responding.