topic Re: SNMP error when bonding set to active/backup in Operating System - Linux

SNMP error when bonding set to active/backup

dovi5988 — Tue, 31 Dec 2013 02:39:46 GMT

Hi,

I have set up in linux mode=1 (active/backup). When doing an SNMP check I get back:

Compaq/HP Agent Check: status of the NIC logical group (standbyFailed)

Why is that if both interfaces are up?

[root@serv1 ~]# ethtool bond0 | grep Link
        Link detected: yes
[root@serv1 ~]# ethtool eth0 | grep Link
        Link detected: yes
[root@serv1 ~]# ethtool eth1 | grep Link
        Link detected: yes
[root@serv1 ~]#

P.S. This thread has been moved from Laserjet to Linux > sysadmin. - Hp Forum Moderator

Re: SNMP error when bonding set to active/backup

dovi5988 — Thu, 02 Jan 2014 17:39:35 GMT

Since no one is repsonding here does anyone know how to contact HP to get an answer?

Re: SNMP error when bonding set to active/backup

Dennis Handly — Thu, 02 Jan 2014 20:08:31 GMT

>does anyone know how to contact HP to get an answer?

If you have a support contract try contacting the HPSC:
http://www.hp.com/go/hpsc