topic Re: Redhat 7.2 error during boot in Operating System - Linux

Redhat 7.2 error during boot

Chad Rendell_1 — Sat, 05 Jul 2003 16:59:54 GMT

Hey

Getting this message on a Netserver LH3. RH 7.2.

Ncr53c895-o: resetting, command processing suspended for 2 seconds
Ncr53c895-o: Command processing resumed

Re: Redhat 7.2 error during boot

Caesar_3 — Sat, 05 Jul 2003 17:50:36 GMT

Hello!

I'm not shure what's this module, pls explane.
You should check if you have problem with the
harware that is use the Ncr53c895.o
Also you can off the deamon of this
hardware.
But explain what's is this Ncr53c895

Caesar

Re: Redhat 7.2 error during boot

Stuart Browne — Mon, 07 Jul 2003 02:37:29 GMT

Ncr53c895 is the driver for the LH3's onboard Symbios SCSI controller.

What devices do you have on the Symbios controller?

/proc/scsi/scsi is your friend in this case.

I'm picking, however, that this is just some kernel debugging to say that the device chain is busy, and sometimes needs to resend commands (or retry) on the SCSI bus.

Does this occur whilst you are performing some system intensive activity (i.e. a backup)? or is this showing up when the machine is idle?

Have you updated the kernel to the latest from the eratta, or did you compile your own, or are still using the stock kernel that came with RH7.2?