https://community.hpe.com/t5/operating-system-linux/how-to-install-centos8stream-on-dl325-using-ilo/m-p/7124168#M55276 <P>Never mind - adding inst.text to the boot options solved the problem.</P> Sat, 06 Mar 2021 05:15:39 GMT Chris_Drake 2021-03-06T05:15:39Z https://community.hpe.com/t5/operating-system-linux/how-to-install-centos8stream-on-dl325-using-ilo/m-p/7124160#M55275 <P>1. My kickstart script locks up indefinitely, printing "link not ready" for eth1, eth2, and eth3 every minute or so (I gave it about 5 minutes before I reset).&nbsp; Those are not plugged in - they will never be "ready".&nbsp; Is there a way to tell it to ignore those?</P><P>2. Just booting the .iso ( CentOS-Stream-8-x86_64-20210302-dvd1.iso ) gets almmost all the way to the end, then locks up at a blakc screen right after the "starting anaconda" (or similar) text step.</P><P>I'm using an EPYC 7702 with 8x 1tb SSDs in Raid6 (EUFI)</P><P>the .iso is mounted through firefox browser html5 console (works fine for "systemrescuecd-5.iso" and does boot OK of course - just never reaches the centos install GUI).</P> Sat, 06 Mar 2021 04:45:40 GMT https://community.hpe.com/t5/operating-system-linux/how-to-install-centos8stream-on-dl325-using-ilo/m-p/7124160#M55275 Chris_Drake 2021-03-06T04:45:40Z https://community.hpe.com/t5/operating-system-linux/how-to-install-centos8stream-on-dl325-using-ilo/m-p/7124168#M55276 <P>Never mind - adding inst.text to the boot options solved the problem.</P> Sat, 06 Mar 2021 05:15:39 GMT https://community.hpe.com/t5/operating-system-linux/how-to-install-centos8stream-on-dl325-using-ilo/m-p/7124168#M55276 Chris_Drake 2021-03-06T05:15:39Z