HPE DL385 Gen10 Plus HW prometheus exporter

Fl1nt — Thu, 22 Apr 2021 07:39:12 GMT

Hi everyone!
I'm currently looking to monitor my nodes temperatures and power consumption through our monitoring platform (prometheus/grafana) and I'm having some issues with the node_exporter as it reports 0 power consumption where it should be around 400W according to the iLO power interface.

Do you use node_exporter to do that and if so, do you have specific HPE settings?
If not using I'd like to know if a HPE_NODE_EXPORTER exist? I don't want to use the blackbox_exporter that would then just contact the iLO interfaces.

Weird thing is, CentOS on such HPE node isn't populating any /sys/class/power_supply hook which is used by node_exporter, it works with an equivalent DELL or Supermicro server so did I missed something? Do I need to install hp-health ?

Re: HPE DL385 Gen10 Plus HW prometheus exporter

Fl1nt — Tue, 27 Apr 2021 13:20:29 GMT

Anyone have any ideas or suggestions?

Re: HPE DL385 Gen10 Plus HW prometheus exporter

sudhirsingh — Sun, 16 May 2021 07:26:19 GMT

Hi,

Try to install Centos management component pack and check if it help

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_11c5369e27b74c1f8ab06f9aac

Regards,

Sudhir

topic Re: HPE DL385 Gen10 Plus HW prometheus exporter in Operating System - Linux

HPE DL385 Gen10 Plus HW prometheus exporter

Re: HPE DL385 Gen10 Plus HW prometheus exporter

Re: HPE DL385 Gen10 Plus HW prometheus exporter