https://community.hpe.com/t5/operating-system-linux/p-class-blades-and-ice-linux-v2-0/m-p/4193774#M55477 p-Class blades were recently qualified with ICE-Linux v2.0. As a result of this qualification effort, it was determined that the discovery of p-Class blades in the configuration breaks the ICE-Linux Nagios monitoring capabilities (i.e. Nagios fails to start). Note that no issues were identified with using ICE-Linux to deploy p-Class blades. If you have p-Class blades in your configuration, you must follow the procedure below to work around the Nagios start-up issue.<BR /><BR />However, official support for p-Class blades will not be provided until a formal fix is released.<BR /><BR />Perform the following steps on your CMS to enable Nagios to start:<BR /><BR />1. Download the attachment file from this note: <BR /> hp_svc_nagios.patch<BR /><BR />2. Change to the directory that contains the file<BR /> # cd /opt/hptc/nagios/bin<BR /><BR />3. Make a backup copy of the original file<BR /> # cp -p hp_svc_nagios hp_svc_nagios.orig<BR /><BR />4. Patch the file using the downloaded patched file<BR /> # patch hp_svc_nagios hp_svc_nagios.patch<BR /><BR />5. Restart Nagios if you have already run "Configure ICE-Linux Management Services"<BR /> # /etc/init.d/nagios restart<BR /> Thu, 08 May 2008 02:05:28 GMT Christopher Grandinetti 2008-05-08T02:05:28Z https://community.hpe.com/t5/operating-system-linux/p-class-blades-and-ice-linux-v2-0/m-p/4193774#M55477 p-Class blades were recently qualified with ICE-Linux v2.0. As a result of this qualification effort, it was determined that the discovery of p-Class blades in the configuration breaks the ICE-Linux Nagios monitoring capabilities (i.e. Nagios fails to start). Note that no issues were identified with using ICE-Linux to deploy p-Class blades. If you have p-Class blades in your configuration, you must follow the procedure below to work around the Nagios start-up issue.<BR /><BR />However, official support for p-Class blades will not be provided until a formal fix is released.<BR /><BR />Perform the following steps on your CMS to enable Nagios to start:<BR /><BR />1. Download the attachment file from this note: <BR /> hp_svc_nagios.patch<BR /><BR />2. Change to the directory that contains the file<BR /> # cd /opt/hptc/nagios/bin<BR /><BR />3. Make a backup copy of the original file<BR /> # cp -p hp_svc_nagios hp_svc_nagios.orig<BR /><BR />4. Patch the file using the downloaded patched file<BR /> # patch hp_svc_nagios hp_svc_nagios.patch<BR /><BR />5. Restart Nagios if you have already run "Configure ICE-Linux Management Services"<BR /> # /etc/init.d/nagios restart<BR /> Thu, 08 May 2008 02:05:28 GMT https://community.hpe.com/t5/operating-system-linux/p-class-blades-and-ice-linux-v2-0/m-p/4193774#M55477 Christopher Grandinetti 2008-05-08T02:05:28Z