https://community.hpe.com/t5/operating-system-linux/ice-linux-nagios-hp-graph-network-summary/m-p/4260261#M55618 In nagios in the hp graph plugin. The graphs of network summary for a host are not shown if the host has &gt; 10 interfaces. This comes from the max_nics setting:<BR /><BR />my $max_nics = 10; # maximum possible NICs on a node<BR /><BR />A full height blade having 12 NIC ports using bonding and a localhost has at least 19 interfaces. Can this limited be raised a value like 30 or 40?<BR /><BR />Thanks,<BR />Peter<BR /> Fri, 29 Aug 2008 08:27:03 GMT Peter_Vreman 2008-08-29T08:27:03Z https://community.hpe.com/t5/operating-system-linux/ice-linux-nagios-hp-graph-network-summary/m-p/4260261#M55618 In nagios in the hp graph plugin. The graphs of network summary for a host are not shown if the host has &gt; 10 interfaces. This comes from the max_nics setting:<BR /><BR />my $max_nics = 10; # maximum possible NICs on a node<BR /><BR />A full height blade having 12 NIC ports using bonding and a localhost has at least 19 interfaces. Can this limited be raised a value like 30 or 40?<BR /><BR />Thanks,<BR />Peter<BR /> Fri, 29 Aug 2008 08:27:03 GMT https://community.hpe.com/t5/operating-system-linux/ice-linux-nagios-hp-graph-network-summary/m-p/4260261#M55618 Peter_Vreman 2008-08-29T08:27:03Z https://community.hpe.com/t5/operating-system-linux/ice-linux-nagios-hp-graph-network-summary/m-p/4260262#M55619 Hello Peter,<BR /><BR />We believe that increasing this number is ok and will not cause any adverse affects. <BR /><BR />However, we will need to investigate this further to be certain. We will do this and reply back to this thread when that investigation is complete.<BR /><BR />Regards,<BR />-Chris<BR /><BR /> Mon, 08 Sep 2008 15:40:49 GMT https://community.hpe.com/t5/operating-system-linux/ice-linux-nagios-hp-graph-network-summary/m-p/4260262#M55619 Christopher Grandinetti 2008-09-08T15:40:49Z