How to configure standby heartbeat network on hp ux serviceguard

Shamsuddoha — Sat, 13 Jul 2019 10:30:59 GMT

In my enviroment i have two node hp ux-v3 serviceguard, for heartbeat network we have configure single NIC from both node, i want to confgiure another physical NIC for standby heartbeat network.

Note: link aggregation is not possible due to 10G nic, confirm by HPE back line team.

Re: How to configure standby heartbeat network on hp ux serviceguard

RajUX — Fri, 19 Jul 2019 04:30:31 GMT

Examine the cluster configuration ASCII file , sometimes
called /etc/cmcluster/cmclconfig.ascii or better create a new config file using current settings using cmgetconf command. You might have some
STATIONARY_IP exists, change it to HEARTBEAT_IP and cmcheckconf and cmapplyconf.

if you have extra interface, create entry below each hosts as:

NETWORK_INTERFACE lanx
HEARTBEAT_IP xx.xx.xx.xx

and check and apply the config.

topic How to configure standby heartbeat network on hp ux serviceguard in Operating System - Linux

How to configure standby heartbeat network on hp ux serviceguard

Re: How to configure standby heartbeat network on hp ux serviceguard