topic Re: cluster configuration cman in Operating System - Linux

cluster configuration cman

nasmel — Wed, 14 Mar 2007 03:47:53 GMT

i am configuring a 2 node cluster using RHCS.i was successfull in installing the cluster with GULM lock server,but i want it to change to DLM.I tried to do that
from tool menu by clicking change to DLM and by clicking on Send to cluster,at that tie am getting an error message like

"A problem was encountered when attempting to get information about the nodes in the cluster:/sbin/cman_tool:cant open /proc/cluster/nodes, cman not runnuing"

I tried to start cman service but it also fails

#rpm -ivh cman*
failed dependencies

/lib/modules/2.6.9-42.EL is needed by cman kernel-2.6.9-45.2.i686

similar entries for caman-kernel-hugemem and cman-kernel-smp

#rpm -ivh cman* --nodeps
says that all the packages are installed

i have already installed the Kernel
2.6.9-45.0.10.ELsmp

#uname -a
Linux xxx.xxx 2.6.9-42.0.10.ELsmp #1 SMP Fri ...i686 i686 i386 GNU/Linux

wat to do next,how to reinstall or

Re: cluster configuration cman

Ivan Ferreira — Wed, 14 Mar 2007 10:03:26 GMT

The cman package is depending of a kernel version older than you have installed. Download the kernel version requiered for cman (2.6.9-42.EL).

Then remove /etc/cluster/cluster.conf in both nodes and run system-config-cluster again.

Re: cluster configuration cman

nasmel — Wed, 14 Mar 2007 13:04:41 GMT

Yep.it worked out...
Downgraded to 26.9-42.EL and its working..
thanks

Re: cluster configuration cman

Ivan Ferreira — Wed, 14 Mar 2007 14:25:24 GMT

I'm glad it worked.

Please if you have time, check your questions and answers and assing some points to the people that helped you.

Have a nice day.

http://forums1.itrc.hp.com/service/forums/publicProfile.do?userId=CA1444959&forumId=1