https://community.hpe.com/t5/operating-system-linux/configuring-virtulization-network-bridge-on-rhel6/m-p/6031245#M58643 <P><SPAN class="TextBodyTextLB">I'm trying to configure a KVM virtualization server using libvirt on RHEL6, I have the guest VMs configured and running, however am running into difficulties when bridging to the physical network. Unfortunately the physical network port has mac address filtering enabled, and therefore becomes disabled whenever the physical interface (eth3) is added to virbr0. How can I configure RHEL to hide the mac addresses of the vnetn virtual network devices?</SPAN></P> Tue, 16 Apr 2013 13:35:48 GMT z3r0c00l 2013-04-16T13:35:48Z https://community.hpe.com/t5/operating-system-linux/configuring-virtulization-network-bridge-on-rhel6/m-p/6031245#M58643 <P><SPAN class="TextBodyTextLB">I'm trying to configure a KVM virtualization server using libvirt on RHEL6, I have the guest VMs configured and running, however am running into difficulties when bridging to the physical network. Unfortunately the physical network port has mac address filtering enabled, and therefore becomes disabled whenever the physical interface (eth3) is added to virbr0. How can I configure RHEL to hide the mac addresses of the vnetn virtual network devices?</SPAN></P> Tue, 16 Apr 2013 13:35:48 GMT https://community.hpe.com/t5/operating-system-linux/configuring-virtulization-network-bridge-on-rhel6/m-p/6031245#M58643 z3r0c00l 2013-04-16T13:35:48Z