https://community.hpe.com/t5/operating-system-linux/how-to-create-mpath1-file-without-server-reboot/m-p/4838759#M59915 <P>Hellow forum,</P><P><BR />Which command on linux is used to create the /dev/mapper/mpath1 file?</P><P><BR />I have connected the linux server (RH el5.4) to the eva with 2 fiber, and installed the HP device mapper.<BR />However I have notice that <U>only after reboot</U> the /dev/mapper/mpath1 file is created. ( I repeated the test several times and the multipath is working fine)</P><P><BR />Is there a way to create the mpath1 file without rebooting the server?</P><P>&nbsp;</P><P>Thank you.</P> Mon, 25 Jul 2011 12:39:20 GMT Sys55 2011-07-25T12:39:20Z https://community.hpe.com/t5/operating-system-linux/how-to-create-mpath1-file-without-server-reboot/m-p/4838759#M59915 <P>Hellow forum,</P><P><BR />Which command on linux is used to create the /dev/mapper/mpath1 file?</P><P><BR />I have connected the linux server (RH el5.4) to the eva with 2 fiber, and installed the HP device mapper.<BR />However I have notice that <U>only after reboot</U> the /dev/mapper/mpath1 file is created. ( I repeated the test several times and the multipath is working fine)</P><P><BR />Is there a way to create the mpath1 file without rebooting the server?</P><P>&nbsp;</P><P>Thank you.</P> Mon, 25 Jul 2011 12:39:20 GMT https://community.hpe.com/t5/operating-system-linux/how-to-create-mpath1-file-without-server-reboot/m-p/4838759#M59915 Sys55 2011-07-25T12:39:20Z https://community.hpe.com/t5/operating-system-linux/how-to-create-mpath1-file-without-server-reboot/m-p/4838769#M59916 Hi<BR /><BR />Please refer<BR /><A href="http://h30499.www3.hp.com/t5/System-Administration/Installing-multipath-for-RHEL-5/m-p/4143413#M31617" target="_blank">http://h30499.www3.hp.com/t5/System-Administration/Installing-multipath-for-RHEL-5/m-p/4143413#M31617</A> Mon, 25 Jul 2011 12:49:15 GMT https://community.hpe.com/t5/operating-system-linux/how-to-create-mpath1-file-without-server-reboot/m-p/4838769#M59916 Naj 2011-07-25T12:49:15Z