topic Re: Install SupportPack 4.108 fails. in Operating System - Linux

Install SupportPack 4.108 fails.

JBR — Fri, 10 Sep 2010 10:12:42 GMT

Hi, IÂ´m trying to install the Integrity Linux SupportPack 4.108 in a RX2660 with RH4U7 + up2date and this fails.

In the pdf document says: "The Linux OS installation completes. HP recommends that you run the HP Support Pack installer
immediately after the installation of the OS is complete as described in Chapter 5 (page 37)."

Reinstall OS? Downgrade the OS? Install RPMÂ´s one by one bypassing install script?

Thanks in advance....

Re: Install SupportPack 4.108 fails.

Modris Bremze — Sun, 12 Sep 2010 20:35:55 GMT

How/where exactly does the support pack setup fail?

Re: Install SupportPack 4.108 fails.

JBR — Mon, 13 Sep 2010 06:59:03 GMT

In the install.py python script.

Re: Install SupportPack 4.108 fails.

Modris Bremze — Mon, 13 Sep 2010 08:08:43 GMT

Ok..maybe there is an error message or other hints which suggest that the setup has failed? Or just the exit code?

Re: Install SupportPack 4.108 fails.

JBR — Mon, 13 Sep 2010 08:56:57 GMT

I think that is in the verify Operating System Version.

The install.py check for the RPM package "redhat-release" ... but this is a Redhat Installation + up2date (yum) then "install.py" fail to determine the correct operating system version.