https://community.hpe.com/t5/operating-system-linux/sabayon-linux-on-proliant-dl360-g4/m-p/4191840#M62061 Probably you need to disable a kernel feature at boot time, like noapic, noapm or something like that. Mon, 05 May 2008 20:16:19 GMT Ivan Ferreira 2008-05-05T20:16:19Z https://community.hpe.com/t5/operating-system-linux/sabayon-linux-on-proliant-dl360-g4/m-p/4191838#M62059 I'm curious as to how to get Sabayon Linux 3.4 installed on this machine. I have StartSmart CDs but they only let me pick Windows as an OS. I'm not sure why installing an OS on this server needs to be so complicated but any info you can provide would be helpful.<BR /><BR />Thanks. Mon, 05 May 2008 13:20:20 GMT https://community.hpe.com/t5/operating-system-linux/sabayon-linux-on-proliant-dl360-g4/m-p/4191838#M62059 Frank Z 2008-05-05T13:20:20Z https://community.hpe.com/t5/operating-system-linux/sabayon-linux-on-proliant-dl360-g4/m-p/4191839#M62060 I should clarify what happens when I try to install it: The installation goes fine. When it goes to reboot for the first time, it just hangs when it gets to the point where it loads the OS. Sabayon never starts. Mon, 05 May 2008 13:28:48 GMT https://community.hpe.com/t5/operating-system-linux/sabayon-linux-on-proliant-dl360-g4/m-p/4191839#M62060 Frank Z 2008-05-05T13:28:48Z https://community.hpe.com/t5/operating-system-linux/sabayon-linux-on-proliant-dl360-g4/m-p/4191840#M62061 Probably you need to disable a kernel feature at boot time, like noapic, noapm or something like that. Mon, 05 May 2008 20:16:19 GMT https://community.hpe.com/t5/operating-system-linux/sabayon-linux-on-proliant-dl360-g4/m-p/4191840#M62061 Ivan Ferreira 2008-05-05T20:16:19Z