https://community.hpe.com/t5/operating-system-linux/psp-8-15-install-on-redhat-server-5/m-p/4313903#M62755 My mistake. Had two different kernels floating about. Installed fine once fixed. Sat, 29 Nov 2008 22:03:04 GMT Tim Munn 2008-11-29T22:03:04Z https://community.hpe.com/t5/operating-system-linux/psp-8-15-install-on-redhat-server-5/m-p/4313902#M62754 I am trying to get the PSP installed correctly on a blade, specifically a ProLiant BL460c G1 blade with an Emulex FC HBA mezzanine card. I get the wonderful message from the install815.sh script :<BR />The HP ProLiant Linux Deployment Utility requires source code for the 2.6.18-92.el5PAE kernel be available for building and installing certain drivers included in this bundle. The directory, /lib/modules/2.6.18-92.el5PAE/build, is either missing, or is empty.<BR /><BR />I've installed what I believe are the right kernel source and headers rpms but can't seem to get this sorted out. I get differing messages in hppldu.log that seem erroneous like: A file, /usr/bin/gcc, necessary to complete installation of the HP Linux Driver Kit for Emulex Based Fibre Channel Host Bus Adapters for 2.6.x Kernels<BR />component is not present. <BR /><BR />but the errors seem related if the kernel can't be compiled properly although gcc is most definitely installed and in the proper location /usr/bin so I'm kind of just flummoxed. <BR /><BR />Any ideas would be most gratefully appreciated.<BR /><BR /><BR /> Thu, 27 Nov 2008 01:37:53 GMT https://community.hpe.com/t5/operating-system-linux/psp-8-15-install-on-redhat-server-5/m-p/4313902#M62754 Tim Munn 2008-11-27T01:37:53Z https://community.hpe.com/t5/operating-system-linux/psp-8-15-install-on-redhat-server-5/m-p/4313903#M62755 My mistake. Had two different kernels floating about. Installed fine once fixed. Sat, 29 Nov 2008 22:03:04 GMT https://community.hpe.com/t5/operating-system-linux/psp-8-15-install-on-redhat-server-5/m-p/4313903#M62755 Tim Munn 2008-11-29T22:03:04Z