https://community.hpe.com/t5/operating-system-linux/qlogic-and-multipathing/m-p/5079897#M63174 Hi,<BR />i have a DL380 with a qlogic an two lune attached.<BR />I see also 2 lune but i want have the multipathing .<BR />I have installed a driver:<BR /> rpm -q hp_qla2x00src<BR />hp_qla2x00src-8.01.06.01-12<BR />and utility:<BR />rpm -q fibreutils<BR />fibreutils-2.2-2Disks <BR />but i see also:<BR />sda da 6.84 GB<BR />sdb da 73.24 GB<BR /><BR />i want see :<BR />sda da 6.84 GB<BR />sdc da 6.84 GB <BR /> <BR />sdb da 73.24 GB<BR />sdd da 73.24 GB<BR /><BR />Help me many point at all<BR /><BR /> Fri, 16 Nov 2007 07:16:13 GMT gigiz 2007-11-16T07:16:13Z https://community.hpe.com/t5/operating-system-linux/qlogic-and-multipathing/m-p/5079897#M63174 Hi,<BR />i have a DL380 with a qlogic an two lune attached.<BR />I see also 2 lune but i want have the multipathing .<BR />I have installed a driver:<BR /> rpm -q hp_qla2x00src<BR />hp_qla2x00src-8.01.06.01-12<BR />and utility:<BR />rpm -q fibreutils<BR />fibreutils-2.2-2Disks <BR />but i see also:<BR />sda da 6.84 GB<BR />sdb da 73.24 GB<BR /><BR />i want see :<BR />sda da 6.84 GB<BR />sdc da 6.84 GB <BR /> <BR />sdb da 73.24 GB<BR />sdd da 73.24 GB<BR /><BR />Help me many point at all<BR /><BR /> Fri, 16 Nov 2007 07:16:13 GMT https://community.hpe.com/t5/operating-system-linux/qlogic-and-multipathing/m-p/5079897#M63174 gigiz 2007-11-16T07:16:13Z https://community.hpe.com/t5/operating-system-linux/qlogic-and-multipathing/m-p/5079898#M63175 See the attached file.<BR /><BR /> Fri, 16 Nov 2007 08:03:37 GMT https://community.hpe.com/t5/operating-system-linux/qlogic-and-multipathing/m-p/5079898#M63175 Ivan Ferreira 2007-11-16T08:03:37Z https://community.hpe.com/t5/operating-system-linux/qlogic-and-multipathing/m-p/5079899#M63176 Ok,<BR />it's normal it manage a failover at low level.<BR />:-) Thu, 22 Nov 2007 09:45:24 GMT https://community.hpe.com/t5/operating-system-linux/qlogic-and-multipathing/m-p/5079899#M63176 gigiz 2007-11-22T09:45:24Z