topic Re: Server Booting Failed in Operating System - Linux

Server Booting Failed

Leandro Mainardi — Wed, 22 Aug 2007 08:44:44 GMT

My server boot failed and the boot message display interpreter "/bin/sh" not found
file link resolves to "/usr/bin/sh"
FAIL *

Re: Server Booting Failed

Ivan Ferreira — Wed, 22 Aug 2007 08:59:47 GMT

That sounds really bad. If your /usr is a different file system, is not mounting, maybe because a file system problem/corruption. You should run fsck.

If you don't have a separate file system for /usr, then you should boot in emergency or rescue mode using the installation CD to verify your file systems and data.

Re: Server Booting Failed

skt_skt — Wed, 22 Aug 2007 22:54:01 GMT

1.Go to rescue mode using the RHEL installation CD with the boot option:

linux rescue

if vg00 not getting mounted automaically.

2.Try to activate the volume groups by running the commands below:

lvmdiskscan
vgchange -ay

3.If vg00 is acitaved Further fsck test can be done using:

tune2fs -l /dev/vg00/lv01 | grep Block

Take note of the Block size.

e2fsck -b -n /dev/vg00/lv01