topic problem installing RHEL3 Update 5 on nx6115 in Operating System - Linux

problem installing RHEL3 Update 5 on nx6115

Saiful Muhd Ramli — Wed, 07 Jun 2006 19:34:54 GMT

Hi,

I've been trying to install RHEL 3 Update 5 on an nx6115 notebook.

The install CD boots up fine and detects devices up to the hard drives. I think the screen blanks right where you would expect X to start up...

I believe the graphics card for this system is an integrated ATI Radeon Mobility X300.

Any help would be appreciated...

Re: problem installing RHEL3 Update 5 on nx6115

Steven E. Protter — Thu, 08 Jun 2006 01:01:04 GMT

Shalom Saiful,

You need to know for certain what your video hardware is. Most ATI video is supported.

Most entry level HP notebooks are very frustrating to work with Linux and simply won't support it.

I would suggest a different distribution. RH 4 might have better hardware support. So might Ubuntu.

SEP

Re: problem installing RHEL3 Update 5 on nx6115

Saiful Muhd Ramli — Fri, 09 Jun 2006 03:03:17 GMT

peace steven!

I did test FC5 and it was able to run the installer.

However, I am limited to RHEL 3 due to the EDA apps that I need to install on the system.

I did some tests and concluded that the system isn't hanging, it just can't display...

Happily I did manage to get the notebook to display properly by typing:
linux vga=771

I found the above tip at a ThinkBook wiki.. What actually does vga=771 mean?

Re: problem installing RHEL3 Update 5 on nx6115

Alan_152 — Fri, 09 Jun 2006 09:29:54 GMT

How about upgrading to rhel3u7 instead, or try the beta of u8?

Re: problem installing RHEL3 Update 5 on nx6115

Saiful Muhd Ramli — Sun, 11 Jun 2006 18:20:24 GMT

Hi Alan,

That's a good suggestion, but I will have to try it on some other installation as I need this one to be up..

Thanks again folks for your suggestions!