topic Re: Fedora Core 5 + Proliant DL 320 G4 in Operating System - Linux

Fedora Core 5 + Proliant DL 320 G4

alexandre mazovetski — Wed, 06 Sep 2006 05:31:33 GMT

Is an installation of FC5 on Proliant DL 320 G4 possible? After installation there is a problem of the starting of FC5 with error messages
/var/log/messages:

usb 5-2: new full speed USB device using uhci_hcd and address 81
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 7 ports detected
usb 5-1: USB disconnect, address 80
usb 5-1: new full speed USB device using uhci_hcd and address 82
input: HP Virtual Keyboard as /class/input/input4993
input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
usb 5-2: USB disconnect, address 81
Help me pls

Re: Fedora Core 5 + Proliant DL 320 G4

sandeep_raman — Wed, 06 Sep 2006 13:45:16 GMT

Hello alexandre,

Check USB setting in BIOS.
Any USB device connected?

SRH

Re: Fedora Core 5 + Proliant DL 320 G4

alexandre mazovetski — Thu, 07 Sep 2006 00:46:13 GMT

Yep, I switched USB and 2iLO off -> same problems

Re: Fedora Core 5 + Proliant DL 320 G4

david-williams — Thu, 07 Sep 2006 04:07:23 GMT

check your BIOS for USB Legacy support

Re: Fedora Core 5 + Proliant DL 320 G4

alexandre mazovetski — Fri, 08 Sep 2006 02:09:21 GMT

I already checked BIOS for USB legacy support. OFF or ON are same problems...

Re: Fedora Core 5 + Proliant DL 320 G4

david-williams — Fri, 08 Sep 2006 02:16:37 GMT

can you pass this to your kernel ?
probe/usb=false noapic nolapic

Re: Fedora Core 5 + Proliant DL 320 G4

alexandre mazovetski — Fri, 08 Sep 2006 09:39:05 GMT

Explain pls how I can do it:

probe/usb=false noapic nolapic

thx for your help

Re: Fedora Core 5 + Proliant DL 320 G4

david-williams — Fri, 08 Sep 2006 09:46:29 GMT

Hi

I am not a big fan of redhat based distro's but every distro has an option to pass info to kernel at boot, when you install Fedora i think it's F4 or F5