topic Re: Installing Proliant DL380 G4 with slackware 10.0 in Operating System - Linux

Installing Proliant DL380 G4 with slackware 10.0

Hector Cordero — Thu, 16 Feb 2006 12:51:20 GMT

Hi all,

I'm installing a DL380 G4 with Linux slackware 10.0 I have a smartarray controller 6i and RAID1.

when I booting from CD/ROM the system don't see the smartarray controller.

Where can I to go for get the smartarray 6i driver?

Thnks,

Re: Installing Proliant DL380 G4 with slackware 10.0

Vitaly Karasik_1 — Thu, 16 Feb 2006 14:26:29 GMT

I don't sure that HP provides a sources for cciss driver (http://h18004.www1.hp.com/support/files/server/us/download/23463.html). If yes, you can try to add this driver into Slackware install CD.
IMHO, installation of RHEL (or CENTOS - free RHEL clone) or SLES will be the best solution.

Rgds,
Vitaly

Re: Installing Proliant DL380 G4 with slackware 10.0

Arno Kuyper_1 — Thu, 16 Feb 2006 15:32:07 GMT

Hector,

You can try the cciss drivers from http://sourceforge.net/projects/cciss/ or try if the bootdisk from http://ftp.sh.cvut.cz/MIRRORS/slackware/slackware-10.0/bootdisks/
recognize the SA card.

Hope it helps,

Arno

Re: Installing Proliant DL380 G4 with slackware 10.0

nsc.gr — Fri, 17 Feb 2006 06:19:46 GMT

Hey Hector,

First of all why dont you install the latest slack 10.2? It works fine.

Anyways slack 10 might work as well if on the boot menu of the installation ( boot: ) you load the kernel that supports the raid controllers (raid.s). In that menu you can get more help if you press the F1,F2,F3 keys.

G

Re: Installing Proliant DL380 G4 with slackware 10.0

Vipulinux — Fri, 17 Feb 2006 06:38:44 GMT

Hi
Use the latest stable version and you will be fine
Cheers

Re: Installing Proliant DL380 G4 with slackware 10.0

Sergejs Svitnevs — Fri, 17 Feb 2006 06:39:30 GMT

You should start the installation with the 2.6 kernel (instead kernel 2.4 by default).

At the initial prompt when you boot with the installer CD, type: test26.s

Regards,
Sergejs